Replace Your Chevrolet GMC Key Fob Remote Case/Shell
Important Remote Product Information
- Don’t Buy a New Remote if You Don’t have to! Just Replace the Case to Make it Look Brand New
- No Re-Programming Required – Just Pop Open your Existing Remote and place Electronics in the New Case and Snap Shut
- No Battery or Electronics Included — Just the Case/Shell
- High-Quality Replacement sourced Exclusively by NorthCoast Keyless
- Check Product Details Tab for Technical Information on this Case/Shell, such as Key Fob FCC ID, Part Numbers, etc.
- Save Time and Follow our Guide to Use Your VIN# to Look Up the Correct Key Fob Part Number for Your Vehicle
- Buy Key Fob Replacements with NorthCoast Keyless and Unlock Unbeatable Savings
What’s Included
- Case/Shell Only – *No Battery or Electronics Included*
Skip the dealership markups and unreliable aftermarket knock-offs! Choose NorthCoast Keyless for high-quality, durable key fobs at a fraction of the cost of other sellers. All of our products are built to last longer than competitors and come with the NorthCoast Commitment—our no-risk customer guarantee. If it doesn’t work with your vehicle you get your money back. Save big without sacrificing quality!
Additional Helpful Information
See all Buy Key Fob Remote Accessories
See all Buy Key Fob Remote Replacement Cases & Shells
See all Chevrolet Key Fob Remotes
See all GMC Key Fob Remotes
Parm (verified owner) –
This product worked perfectly on my 2000 Pontiac GrandPrix GT. Similar products on Amazon failed.
THOMAS TAYLOR (verified owner) –
HELLO
MY 1ST TIME SHOPPING WITH YOU FOLKS.. SHIPPING WAS QUICK.. PRODUCT LOOKS AS ADVERTISED.. YOUR SITE PROVIDED ME WITH EASY ACCESS AND GOOD INSTRUCTION TO PROGRAM MY NEW KEY FOB.. I WAS VERY IMPRESSED WITH THE EASE OF PROGRAMMING.. THANK YOU NORTH COAST..
THOMAS TAYLOR
SASKATOON
SK
Delmar Milligan (verified owner) –
This Key Fob replaced my original Fob from 2007. Installation was quick and easy. NorthCoastKeyless price is a lot cheaper than the dealer and less than Auto Parts stores. I forgot how to separate the battery cover. So, I will pass on a few things to make the replacement easier. To separate your battery cover look for a small slit along the seam. Pry the seam open starting at the slot in the seam. The slot does not go all the way into the Fob. So find the right tool (screw driver blade thickness and width) to prevent cracking or marring the Fob. Gently pry open the seam open. If it has been opened in 2 years you will need to gently work it open. NOTE: To find the slot look at the key Fob seam, with the buttons up and the horn button end towards you will see the slot just to the right in the seam. Replacing the circuit board is easy. Before removing the circuit board and battery look at them and notice how they were originally installed. They will need to be fully in place before closing the case. Carefully remove the circuit board and battery. Install the old circuit board fully into the case. Carefully work the board and battery into place, they click into place.
Working with these switches/circuit boards for 40+ years I have learned that the board is usually fully functional if only one button fails. And the rubber button needs maintenance. Just like the icon fading on the outside of the button the conductive material on the inside of the button wears off. The circuit board printed S for the button should last for 30+ years.
Rosemary (verified owner) –
I was so happy to be able to purchase a keyless remote for my 2006 Pontiac Montana SV6. Even though it had to be programmed at a locksmith, the programming was done at less than half the cost the dealer was charging. Furthermore, the dealer had informed me they were no longer even available. They had been discontinued. It is great, and I am so grateful to have a backup remote.
Andrew Chiappa (verified owner) –
If your original key fobs for your pontiac solstice are worn out or broken, this is the place to buy new ones. They worked perfect.
Ryan A Berendse (verified owner) –
Ordered for my 2005 Grand Prix Gxp, had a GM tech friend swing by and program it quick and it works great, will definitely use them again in the future
William Mulder (verified owner) –
Received my new key fob for my 2009 Montana SV6, brought it to my local garage and they set it up.
Although the add stated years 2005-2008 for my vehicle, it also works on the 2009 model year.
It works great.
G (verified owner) –
The best ever. Saved a ton of money. The only thing I didn’t know was that the fobs needed to be programmed…so I had to spend money to have them programmed. But still saved money. Very easy. Thanks
Richard (verified owner) –
Ordered for my 2000 Firebird Formula. Followed the instructions and it works perfectly. I will order another. Great product with great instructions. Can’t go wrong with this one!
Dan (verified owner) –
Received new keyfob and worked as advertised. Very happy.