Easy to Follow Step-by-step Key fob remote Programming Instructions
2011 Cadillac CTS
We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.
Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!
Free Key Fob Remote Programming Instructions for a 2011 Cadillac CTS
Time needed: 10 minutes.
SMART PROXIMITY KEY FOB REMOTE - WITH ONE PROGRAMMED REMOTE
Step-By-Step How To Programming Instructions
- Place Programmed Smart Key
PLACE the programmed smart key in the Transmitter Pocket (refer to Owner’s Manual for location) with buttons facing the front of the vehicle.
- Access Key Lock Cylinder
REMOVE the key lock cylinder cap from the Driver’s door (to the right of the door handle).
a. Insert the door key into the slot on the bottom of the cover.
b. Lift the key upward to remove the cover. - Enter Programming Mode
INSERT the CUT emergency key of the NEW key fob into the key lock cylinder (located on the outside of the Driver’s door to the right of the door handle) AND TURN the key counterclockwise to the UNLOCK position 5 times within 5 seconds. The Driver Information Console (DIC) will display “READY FOR REMOTE #2, 3, 4, or 5.”
- Program Remote – Step 1
PLACE the NEW key in the Transmitter Pocket (refer to Owner’s Manual for location) with the buttons facing the front of the vehicle.
- Program Remote – Step 2
PRESS the ENGINE START/STOP button. When the smart key is learned, the DIC will display “READY TO LEARN ELECTRONIC KEY #N.”
- Program Remote – Step 3
REMOVE the smart key fob from the Transmitter Pocket and PRESS the UNLOCK button 2 times to finalize programming of the remote.
- Program Additional Remotes
REPEAT Steps 4-6 to program any additional smart key transmitters.
- Exit Programming Mode
PRESS the ENGINE START/STOP button to EXIT Programming Mode.
- Test Remotes
TEST all remotes. Programming is complete.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Time needed: 30 minutes.
SMART PROXIMITY KEY FOB REMOTE - WITHOUT PROGRAMMED REMOTE
Step-By-Step How To Programming Instructions
- Access Key Lock Cylinder
REMOVE the key lock cylinder cap from the Driver’s door (to the right of the door handle).
a. Insert the door key into the slot on the bottom of the cover.
b. Lift the key upward to remove the cover. - Enter Programming Mode – Step 1
INSERT the CUT emergency key of the NEW smart key fob into the key lock cylinder AND TURN the key counterclockwise to the UNLOCK position 5 times within 10 seconds. The Driver Information Console (DIC) will display “PRESS START CONTROL TO LEARN KEYS.”
- Enter Programming Mode – Step 2
PRESS the ENGINE START/STOP button.
- Enter Programming Mode – Step 3
The DIC will display “LEARN DELAY ACTIVE, WAIT X MIN” and WAIT for it to count down to ZERO.
- Enter Programming Mode – Step 4
The DIC will then display “PRESS START CONTROL TO LEARN KEYS” again.
- Enter Programming Mode – Step 5
PRESS the ENGINE START/STOP button.
- Enter Programming Mode – Step 6
The DIC will display “LEARN DELAY ACTIVE, WAIT X MIN” and WAIT for it to count down to ZERO.
- Enter Programming Mode – Step 7
The DIC will then display “PRESS START CONTROL TO LEARN KEYS” again.
- Enter Programming Mode – Step 8
PRESS the ENGINE START/STOP button.
- Enter Programming Mode – Step 9
The DIC will then display “LEARN DELAY ACTIVE, WAIT XX MIN” and WAIT for it to count down to ZERO.
- Program Remote – Step 1
A beep will sound at ZERO and the DIC will display “READY TO LEARN ELECTRONIC KEY #X.”
All previously programmed smart keys will NOT be erased from the vehicle’s memory. - Program Remote – Step 2
A beep will sound once successful programming for the remote is complete.
- Program Remote – Step 3
The DIC will then display “READY TO LEARN ELECTRONIC KEY #X.”
- Program Additional Remotes
To program additional smart keys, place them into the Transmitter Pocket UNTIL a beep is heard and the DIC advances to the next smart key #.
- Exit Programming Mode
PRESS the ENGINE START/STOP button to EXIT Programming Mode.
- Finalize Programming
PRESS the UNLOCK button on each newly programmed smart key to finalize programming.
- Test Remotes
TEST all remotes. Programming is complete.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Programming Notes:
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain ALL remote transmitters for this vehicle.
- Have the emergency key on the new remote cut in preparation for the programming procedure.
Time needed: 3 minutes.
TRANSPONDER KEY
Step-By-Step How To Programming Instructions
- Enter Programming Mode – Step 1
ENTER the vehicle and CLOSE the Driver’s door.
- Enter Programming Mode – Step 2
INSERT working Transponder Key into Ignition and TURN to the ‘ON’ position (just prior to cranking engine), WAIT 1 second and TURN back to the OFF position to successfully enter Programming Mode.
REMOVE key from Ignition. - Program Transponder Key
INSERT NEW key into Ignition and TURN to the ‘ON’ position (just prior to cranking engine).
The key is now programmed to your vehicle. - Test Transponder Key
TEST the new Transponder Key. Programming is now complete.
- Program Additional Transponder Keys
To program additional Transponder Keys, simply repeat the procedure.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Programming Notes:
- Verify the following prior to following these instructions:
- You have a transponder key that is compatible with your vehicle.
- You MUST have 1 working transponder key in order for this procedure to work for your vehicle.
- If you DO NOT have 1 working transponder key, you MUST have the key programmed to your vehicle by a professional.
If you have any difficulties with programming your vehicles, contact us at [email protected].
Key fob remotes
201 Cadillac CTS
MONEY BACK GUARANTEE
We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.
FAST & FREE SHIPPING
ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!
CUSTOMER SUPPORT
Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.
SAVE 70% OVER DEALERSHIPS
We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!
- We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
- If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.
Is this already programmed to the 2011 Cadillac CTS
I owned 2011 cadillac cts 2doors coupe.
no door key hole. how can I programing?
I have inserted my existing key in door lock , turned counter clock wise 5 times and my DIC won’t respond??