You’re smarter than the average bear, so don’t pay an arm and a leg for a keyless entry remote head key fob from the Dealership! And don’t keep getting taken for a ride by cheap knock offs from a Big Box Online Retailer! Get great value and save money on this high quality, long lasting remote from NorthCoast Keyless! Guaranteed to have the correct transponder chip to work with your vehicle. We work hard to offer high quality products to you at a fraction of the Dealership markup that will last longer than the competitor knock offs. Get high quality at rock bottom prices. We’re just trying to make a livin’ not a killin’! Trust our NorthCoast Commitment no risk Customer guarantee that comes with every single order. This product is guaranteed to work with your 2006-2009 Mercury Milan Keyless Entry Key Fob Remote system or your money back.
Purchase New and Save 70% OFF Dealer Prices!
Guaranteed High Quality OEM Electronic
OEM Electronic by NorthCoast — High Quality Re-Cased OEM Electronics
Battery Installed and Key Uncut
40-Bit Transponder Key
MUST be Cut and Programmed by a Professional Automotive Locksmith
Match FCC ID and Part Number in Description to an Existing Remote or call a Dealership with your VIN to Ensure Compatibility with Your Vehicle
Compatible with the Following Models Equipped with Factory Installed Keyless Entry Key Fob Remote System: 2006 2007 2008 2009 Mercury Milan
See all Mercury Key Fob Remotes
See all Mercury Milan Key Fob Remotes
See all Mercury Keyless Entry Key Fob Remote Programming Instructions
See all Mercury Milan Keyless Entry Key Fob Remote Programming Instructions
Paula Koch (verified owner) –
Was able to reprogram my new key fob and my extra key fob with minutes. It was actually easier for me to read my owners manual for reprogramming directions, But the new key fob worked like a charm. All the buttons do what they’re supposed to do, including remote start.
North Coast Keyless is the best!! And the price is unbelievable for the ability to access my car again!!
Greg (verified owner) –
North Coast keyless products are top-notch. I Purchased two Buick key fobs from them And then I programmed them to the car with no problems. They both worked perfectly, And they saved me a lot of money. Thank you very much North Coast keyless.
Greg
L Mayer –
Apparently, these guys know their stuff! I was skeptical, given the online sites indicating that you need a professional to program these fobs. No so. I sent NorthCoast my VIN and they confirmed the exact fob, with the correct frequency. I followed their written programming instructions and it worked perfectly on the first try. They saved me well over $200 for just one key. I’m purchasing more backups from NorthCoast. I strongly support this company!
Rt kulp (verified owner) –
I received my $65.00 Buick enclave key fob in about 1 week and had it programed at Batteries Plus for $85.00 dollars last week saving me over $100.00 vs using GM Dealer!! This was my best Deal!
Owens Locksmith (verified owner) –
Every single product that I have ordered from North Coast Keyless has been perfect, anytime that there has been any type of issue, it has beed handled, right away and resolved. I ALWAYS check with this company first when I need car keys or fobs, they understand our business, and I don’t mean just this order, I mean ALL of my orders!!
Sherry –
Very pleased with product. Easily programmed by locksmith. Arrived quickly. Will definitely refer others.
Michael Smith (verified owner) –
Excellent product—just as advertised- slightly used -easily programmed by my locksmith
Joe Bailey (verified owner) –
I bought two and they worked perfectly. The programing instruction were clear and everything worked without a hitch.
Sure beats going to the dealer paying almost $200 and waiting a couple of hours while they tire to figure out the programming.
I had the two key fobs programmed in less than five minutes.
Tom Giles (verified owner) –
Purchased a ‘lightly used’ fob that was in great condition. Had it programmed at local Buick dealer for $50. Worked fine after the dead battery was replaced. Would have cost over $300 for fob, key and programming from dealer. Shipping was super fast.
Delmar Milligan (verified owner) –
This Key Fob replaced my original Fob from 2007. Installation was quick and easy. NorthCoastKeyless price is a lot cheaper than the dealer and less than Auto Parts stores. I forgot how to separate the battery cover. So, I will pass on a few things to make the replacement easier. To separate your battery cover look for a small slit along the seam. Pry the seam open starting at the slot in the seam. The slot does not go all the way into the Fob. So find the right tool (screw driver blade thickness and width) to prevent cracking or marring the Fob. Gently pry open the seam open. If it has been opened in 2 years you will need to gently work it open. NOTE: To find the slot look at the key Fob seam, with the buttons up and the horn button end towards you will see the slot just to the right in the seam. Replacing the circuit board is easy. Before removing the circuit board and battery look at them and notice how they were originally installed. They will need to be fully in place before closing the case. Carefully remove the circuit board and battery. Install the old circuit board fully into the case. Carefully work the board and battery into place, they click into place.
Working with these switches/circuit boards for 40+ years I have learned that the board is usually fully functional if only one button fails. And the rubber button needs maintenance. Just like the icon fading on the outside of the button the conductive material on the inside of the button wears off. The circuit board printed S for the button should last for 30+ years.