Easy to Follow Step-by-step Key fob remote Programming Instructions
2019 Ford Transit
We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.
Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!
Free Key Fob Remote Programming Instructions for a 2019 Ford Transit
FORD LINCOLN MERCURY HIGH SECURITY BLADE KEY FOB REMOTES
STEP-BY-STEP HOW TO PROGRAMMING INSTRUCTIONS
Minutes 5 minutes
-
Confirm First Programmed Key – Step 1
INSERT the first previously programmed transponder key into the ignition.
-
Confirm First Programmed Key – Step 2
TURN the ignition from OFF to ON. KEEP the ignition ON for at least 3 seconds, but no more than 10 seconds.
-
Confirm First Programmed Key – Step 3
TURN the ignition OFF and REMOVE the first key from the ignition.
-
Confirm Second Programmed Key – Step 1
After 3 seconds, but within 10 seconds of turning the ignition OFF, INSERT the second previously programmed key into the ignition.
-
Confirm Second Programmed Key – Step 2
TURN the ignition from OFF to ON. KEEP the ignition ON for at least 3 seconds, but no more than 10 seconds.
-
Confirm Second Programmed Key – Step 3
TURN the ignition OFF and REMOVE the second key from the ignition.
-
Program New Key – Step 1
After 3 seconds but within 10 seconds of turning the ignition OFF and removing the second key, INSERT the NEW un-programmed key into the ignition.
-
Program New Key – Step 2
TURN the ignition from OFF to ON. KEEP the ignition ON for at least 6 seconds.
-
Program New Key – Step 3
REMOVE the NEW key from the ignition.
If the key was successfully programmed, it will operate the remote entry system and start the vehicle’s engine.
If the key was NOT successfully programmed, it will NOT work the remote entry system or start the vehicle’s engine and the message center will display “NO KEY DETECTED”. Wait 20 seconds and REPEAT the process from Step 1.
-
Test Remote(s)
TEST all remotes. Programming is complete.
-
Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Supply:
- Key Fob Remote(s) that you want to program to your vehicle.
Tools:
- None
Important:
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- You must have 2 working transponder chip keys in order to program a new transponder without the assistance of a professional.
- The key to be programming must be cut prior to beginning this programming procedure.
- To program any additional new keys, wait 20 seconds and REPEAT this procedure.
Note: If your vehicle cannot enter programming mode, then you cannot program any remote. This indicates either no keyless entry installed on the vehicle or a defective keyless entry receiver module.
If you have any difficulties with programming your vehicles, contact us at [email protected].
Key fob remotes
2019 Ford Transit
MONEY BACK GUARANTEE
We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.
FAST & FREE SHIPPING
ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!
CUSTOMER SUPPORT
Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.
SAVE 70% OVER DEALERSHIPS
We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!
- We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
- If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.
Went through the process of programming the remote lock/unlock with my new fob. The process did not work. This key is already programmed to start the vehicle but not able to program the remote unlock/lock feature. I have attempted several methods suggested on line but have not been able to get past the unock/feature.
Have not been able to get the 2019 ford transit into the programming mode so I can program an additional fob. Followed instructions using several different modes.