2013 Chevrolet Equinox Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

2013 Chevrolet Equinox

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2013 Chevrolet Equinox


Time needed: 5 minutes.


FLIP KEY FOB REMOTE - WITH ONE PROGRAMMED FLIP KEY
Step-By-Step How To Programming Instructions

  1. Insert Existing Key

    INSERT a working flip key into the Ignition and TURN to the ON/RUN position (just shy of cranking engine).

  2. Remove Key

    TURN the flip key to the OFF/LOCK position and REMOVE it.

  3. Insert NEW Key

    WITHIN 5 seconds, INSERT the NEW flip key into the Ignition and TURN to the ON/RUN position. The security light will turn OFF to indicate successful programming of the flip key.

  4. Exit Programming Mode

    REMOVE the key from the Ignition to finalize programming and EXIT Programming Mode.

  5. Program Additional Remotes

    REPEAT Steps 1-4 for each additional key to be programmed.

  6. Test Remotes

    TEST all remotes. Programming is complete.

  7. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.
  • You will NEED 1 previously programmed flip key in order to complete this procedure.
  • If you DO NOT have an already programmed flip key fob remote, you will need the assistance of a Professional Automotive Locksmith for programming.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

2013 Chevrolet Equinox

OEM Electronic
OEM Electronic
OEM Electronic
OEM Electronic
NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

One thought on “2013 Chevrolet Equinox Keyless Entry Remote Fob Programming Instructions

  1. Joe Mangarella says:

    Hi,
    Thank you for the above instructions, they were clear and concise. Just one question.
    I need a key fob for my 2013 Equinox for the sole purpose of starting the car to run the a/c and heat
    on those hot and cold days. Does the new fob need to be cut before programming?
    Thank you, Joe

Leave a Reply

Your email address will not be published. Required fields are marked *