2012 Ford Fiesta Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

2012 Ford Fiesta

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2012 Ford Fiesta


Time needed: 3 minutes.


Step-By-Step High Security Remote Head Key Fob Programming Instructions

  1. Prepare for Programming Procedure

    Use the door lock control switch to electronically UNLOCK the door locks.

  2. Enter Programming Mode

    TURN the ignition from the OFF to RUN position 4 times rapidly within 6 seconds, with the 4th turn ending in OFF. The vehicle will chime to signal successful entry into programming mode.

  3. Program Remote

    Within 10 seconds, PRESS ANY button on the un-programmed remote. The vehicle will chime to signal successful programming of the remote.

    REPEAT for any additional remotes to be programmed within 10 seconds.

  4. Exit Programming Mode

    EXIT programming mode by either turning the key back to the RUN position OR after 10 seconds of programming a new remote.

  5. Test Remotes

    TEST all remotes. Programming is complete.

  6. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Time needed: 3 minutes.


Step-By-Step High Security Key Programming Instructions

  1. Confirm First Programmed Key – Step 1

    INSERT the first previously programmed transponder key into the ignition.

  2. Confirm First Programmed Key – Step 2

    TURN the ignition from OFF to RUN. KEEP the key in the RUN position for 3 seconds.

  3. Confirm First Programmed Key – Step 3

    TURN the first previously programmed transponder key to the OFF position and REMOVE it from the ignition.

  4. Confirm Second Programmed Key – Step 1

    Within 10 seconds, INSERT the second previously programmed transponder key into the ignition.

  5. Confirm Second Programmed Key – Step 2

    TURN the ignition from OFF to RUN. KEEP the key in the RUN position for 3 seconds.

  6. Confirm Second Programmed Key – Step 3

    TURN the second previously programmed transponder key to the OFF position and REMOVE it from the ignition.

  7. Program Remote – Step 1

    Within 10 seconds, INSERT the NEW un-programmed transponder key into the ignition.

  8. Program Remote – Step 2

    TURN the ignition from OFF to RUN. KEEP the key in the RUN position for 3 seconds.

  9. Test Remotes

    TEST all remotes. Programming is complete.

  10. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Important:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • You must have 2 working transponder chip keys in order to program a new transponder without the assistance of a professional.
  • The key to be programming must be cut prior to beginning this programming procedure.
  • A MAXIMUM of 8 keys can be programmed to your vehicle. If you’ve had 8 programmed in the past, seek the assistance of a professional programmer.

Note: If your vehicle cannot enter programming mode, then you cannot program any remote.  This indicates either no keyless entry installed on the vehicle or a defective keyless entry receiver module.


Time needed: 3 minutes.


Step-By-Step PEPS Smart Key Fob Programming Instructions

  1. Enter Programming Mode – Step 1

    Have two programmed PEPS smart keys inside the vehicle prior to beginning this procedure.

    PLACE the NEW un-programmed smart key in the pocket inside the center console utility compartment.

  2. Enter Programming Mode – Step 2

    PRESS the driver or passenger power door UNLOCK button 3 times.

  3. Enter Programming Mode – Step 3

    PRESS and RELEASE the brake pedal 1 time.

  4. Enter Programming Mode – Step 4

    PRESS the driver or passenger power door LOCK button 3 times.

  5. Enter Programming Mode – Step 5

    PRESS and RELEASE the brake pedal 1 time. The INDICATOR on the START/STOP button should begin to rapidly flash, indicating Programming Mode has been entered.

  6. Program New PEPS Smart Key Remote

    Within 1 minute, PRESS the START/STOP button on the vehicle. A message will be displayed on the message center indicating that the NEW smart key was programmed successfully.

  7. Exit Programming Mode

    REMOVE the smart key from the utility compartment pocket and PRESS the UNLOCK or LOCK button on the NEW programmed smart key to EXIT programming mode.

  8. Test Remotes

    TEST all remotes. Programming is complete.

  9. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Important:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • You must have 2 working PEPS smart keys in order to program a new key without the assistance of a professional.

Note: If your vehicle cannot enter programming mode, then you cannot program any remote.  This indicates either no keyless entry installed on the vehicle or a defective keyless entry receiver module.


If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

2012 Ford Fiesta

NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published.

{"cart_token":"","hash":"","cart_data":""}