Easy to Follow Step-by-step Key fob remote Programming Instructions
2010 Mazda CX-7
We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.
Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!
Free Key Fob Remote Programming Instructions for a 2010 Mazda CX-7
Time needed: 5 minutes.
FLIP KEY FOB REMOTE - REMOTE PORTION
Step-By-Step How To Programming Instructions
- Prepare Vehicle – Step 1
REMOVE key from Ignition.
- Prepare Vehicle – Step 2
CLOSE ALL doors.
- Prepare Vehicle – Step 3
OPEN Driver’s side door and LEAVE OPEN.
- Enter Programming Mode – Step 1
WITHIN 24 seconds, PERFORM the following steps:
a. INSERT key into Ignition.
b. TURN to the ON position (just shy of cranking) and back to the OFF position.
c. TURN to the ON position (just shy of cranking) and back to the OFF position.
d. TURN to the ON position (just shy of cranking) and back to the OFF position.
e. CLOSE Driver’s side door and OPEN.
f. CLOSE Driver’s side door and OPEN.
g. CLOSE Driver’s side door and OPEN. - Enter Programming Mode – Step 2
Vehicle will cycle door locks LOCK/UNLOCK signaling that the vehicle has successfully entered Programming Mode.
- Program Remote – Step 1
PRESS the UNLOCK button on the first remote to be programmed 2 times. Vehicle will cycle door locks LOCK/UNLOCK signaling that the remote has been successfully programmed.
- Program Additional Remotes
REPEAT Step 6 for ALL remotes you want to use with your vehicle. If you only have 1 remote, REPEAT Step 7 2 additional times. If you have 2 remotes, REPEAT Step 7 with the 2nd remote 2 times.
- Finalize & Exit Programming Mode
CLOSE and OPEN Driver’s side door 1 time to finalize the programming procedure and EXIT Programming Mode. Door locks will cycle LOCK/UNLOCK to confirm.
- Test Remotes
TEST all remotes. Programming is now complete.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Time needed: 5 minutes.
FLIP KEY FOB REMOTE - KEY PORTION
Step-By-Step How To Programming Instructions
- Enter Programming Mode – Step 1
INSERT first programmed transponder key into the Ignition and TURN to the ON position. LEAVE key in Ignition in ON position for approximately 1 second UNTIL the RED security light on the dashboard instrument cluster goes OFF, then REMOVE key from Ignition.
- Enter Programming Mode – Step 2
WITHIN 5 seconds, INSERT second programmed transponder key into the Ignition and TURN to the ON position. The RED key symbol light will ILLUMINATE and go OFF.
- Program Remote
WITHIN 10 seconds, INSERT the new key into the Ignition and TURN to the ON position. The RED security light will ILLUMINATE and go OFF.
- Exit Programming Mode
REMOVE key from Ignition to EXIT Programming Mode.
- Test Remotes
TEST all remotes. Programming is now complete.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Programming Notes:
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain ALL remote transmitters for this vehicle.
- You MAY program up to 3 remotes to your vehicle.
- Flip key(s) MUST be cut in order to program it to your vehicle.
- You MUST have 2 previously programmed transponder keys in order to program a new key portion of your flip key.
If you have any difficulties with programming your vehicles, contact us at [email protected].
Key fob remotes
2010 Mazda CX-7
MONEY BACK GUARANTEE
We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.
FAST & FREE SHIPPING
ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!
CUSTOMER SUPPORT
Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.
SAVE 70% OVER DEALERSHIPS
We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!
- We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
- If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.