2010 Ford Mustang Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

2010 Ford Mustang

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2010 Ford Mustang


Time needed: 3 minutes.


Step-By-Step Key Fob Transponder Key Programming Instructions

  1. Enter Vehicle Programming Mode – Step 1

    INSERT a working transponder chip key into the ignition cylinder.

  2. Confirm First Transponder Chip Key

    TURN the ignition cylinder to ON (position 3) for 5 seconds and then back to OFF (position 1).

  3. Enter Vehicle Programming Mode – Step 2

    REMOVE the first working transponder chip key and INSERT a second working transponder chip key.

  4. Confirm Second Transponder Chip Key

    TURN the ignition cylinder to ON (position 3) for 5 seconds and then back to OFF (position 1).

  5. Activate Un-Programmed Transponder Key – Step 1

    REMOVE the second working transponder chip key and INSERT the un-programmed transponder chip key for activation within 20 seconds.

  6. Activate Un-Programmed Transponder Key – Step 2

    TURN the ignition cylinder to ON (position 3) for 6 seconds and then back to OFF (position 1).

  7. Exit Programming Mode

    The theft indicator light will respond by lighting up for 3 seconds to indicate successful programming of the new transponder chip key and an exit of programming mode.

  8. Test Remotes

    Test all remotes. Programming is now complete.

  9. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Time needed: 2 minutes.


Step-By-Step Key Fob Remote Programming Instructions

  1. Enter Vehicle Programming Mode

    Turn Ignition from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm Programming Mode.

  2. Program Remote

    Within 20 seconds press any button on first keyless remote fob. Door locks will cycle to confirm programming.

    (Repeat immediately for any additional remotes to be programmed.)

  3. Exit Programming Mode

    Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.

  4. Test Remotes

    Test all remotes. Programming is now complete.

  5. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Important:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Transponder Chip Key Programming
    • You must have 2 working transponder chip keys in order to program a new transponder without the assistance of a professional.
    • The key to be programmed must be cut prior to beginning this programming procedure.
  • Key Fob Remote Programming
    • Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.
    • You may clear your keyless entry system memory by entering programming mode as shown in the steps above.

Note: If your vehicle cannot enter programming mode, then you cannot program any remote.  This indicates either no keyless entry installed on the vehicle or a defective keyless entry receiver module.


If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

2010 Ford Mustang

NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published.

{"cart_token":"","hash":"","cart_data":""}