Easy to Follow Step-by-step Key fob remote Programming Instructions
2010 Dodge Journey
We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.
Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!
Free Key Fob Remote Programming Instructions for a 2010 Dodge Journey
Time needed: 5 minutes.
FOBIK KEY FOB REMOTEStep-By-Step How To Programming Instructions
- Insert First Programmed FOBIK
INSERT the first working FOBIK remote key into the Ignition and TURN it to the ON/RUN position.
- Remove First Programmed FOBIK
WITHIN 3-15 seconds, TURN the Ignition back to the OFF/LOCK position and REMOVE the key.
- Insert Second Programmed FOBIK
INSERT the second working FOBIK remote key into the Ignition and TURN it to the ON/RUN position. After 10 seconds, the vehicle will chime to indicate successful entry into Programming Mode.
- Remove Second Programmed FOBIK
TURN the second working FOBIK remote key to the OFF/LOCK position and REMOVE it from the Ignition.
- Program FOBIK Remote
INSERT the new FOBIK remote key into the Ignition and TURN it to the ON/RUN position. After 10 seconds, the Immobilizer Warning Lamp will FLASH to indicate successful programming of this FOBIK remote key.
- Exit Programming Mode
TURN Ignition to OFF/LOCK and REMOVE FOBIK to Finalize programming of the remote and EXIT Programming Mode.
- Program Additional Remote
REPEAT Steps 5-6 to program any additional remotes to your vehicle.
- Test Remotes
TEST all remotes. Programming is complete.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Programming Notes:
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain ALL remote transmitters for this vehicle.
- You MUST have at least TWO working remote head keys in order for this procedure to work.
- If you don’t have at least TWO working remote head keys, you MUST have the remote programmed by an Automotive Locksmith.
If you have any difficulties with programming your vehicles, contact us at [email protected].
Key fob remotes
2010 Dodge Journey
MONEY BACK GUARANTEE
We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.
FAST & FREE SHIPPING
ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!
CUSTOMER SUPPORT
Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.
SAVE 70% OVER DEALERSHIPS
We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!
- We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
- If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.
I only have one working fob. The other one is lost. I would like to buy another fob and program it. If I all ready had two working fobs why would I need to reprogram them? I just need a spare fob for the one that was lost. Do I have to go to the dealer now? 2010 Dodge Journey
Hi Chris,
Thanks for reaching out here. We agree that it isn’t ideal to need two (2) working fobs in order to program a third spare, but we can’t control the manufacturer’s instructions. You will need to get an Automotive Locksmith to program a new fob for you if you do not have two (2) existing working fobs.
Take care,
NorthCoast Support
We have only one working fob for our 2010 jodge journey, however we are having a problem as we can’t unlock the car door by using the fob. Please advised. Thanks
have you had a reply as I have the same problem.
No issue starting the car just unlocking
Hello I have Dodge Journey 2013 I’m have had trying to turn on horn using my RKE Keyless because my Dodge doesn’t have this option in the Uconnect Screen, but I need the specific procedure to turn on/off horn, could you please help me??
Instructions worked perfectly!! Thank you!!!
Do you have a fob that I can program my after market command start to so I only need the one fob instead of two
When you say “working” key, does that mean wireless commands, or simply able to turn on the car when. Inserted? I have a fobik for a 2010 journey and the dog chewed it up a bit. Still starts the car when inserted, but he chewed up the board a little and it no longer locks/unlocks the vehicle.
I only have one key fob for my 2010 Dodge journey. If I buy a key fob from you can I program it to my car myself or will I have to use a professional
I have 2 working FOB Keys that work. I bought a third key and went by your programming instructions. The programming instructions will not work for me. I have a 2010 Dodge Journey SXT. Both keys work. The key I ordered and the 2 working keys will not let me in on your programming instructions. Any help appreciated…..Thanks
Hi i leave in uk and i had lost my fob keyless for dodge journey 2010 2.0 diesel
Is any chance to buy fob and follow your instructions and its going to work ?
Let me know please Thanks
Hey i just bought a new key fob, can i put my old key in the new key fob? and will it work?
Tried it. Doesnt work.
Got keyless fob 2010 Dodge Journey have both old fobs ran thru program procedures new one doesn’t program any suggestions
I only have 1 working fob and am having trouble programing a new fob