2010 Dodge Dakota Keyless Entry Remote Fob Programming Instructions

Step-by-Step How To Programming Instructions for a 2010 Dodge Dakota Keyless Entry Remote Fob

We strive to provide convenience to our customers with free keyless entry remote programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Step-by-Step How To Programming & Memory Clearing Instructions for a 2010 Dodge Dakota Keyless Entry Remote Fob

Verify that this important information is on the back of your remote before using these programming instructions.

FCC ID: OHT692427AA, KOBDT04A

Factory Part No.: 05135670AA, 05143608AA, 05175786AA, 05175786AB, 05179513AA, 05183348AA, 56038751AE, 56038751AH, 56040649AC, 56040649AD, 56040649AE, 56053000AD, 56053000AH, 05179512AA, 05191964AA

Programming Notes:

Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.

You will need at least two (2) working remote head or transponder keys in order to perform this procedure yourself without the help of a Professional.

Keyless Entry System Memory Clearing Instructions are noted in the dark blue colored steps below.

Procedure #1 (Remote Head Keys WITH Immobilizer Chip)
Step-by-Step How To Programming Instructions:

  1. CUT the NEW remote head key for your vehicle.
  2. INSERT the first working remote head key into the Ignition.
  3. TURN the Ignition to the ON position for at least three (3) seconds but no longer than fifteen (15) seconds.
  4. TURN the Ignition to the OFF position and remove the first remote head key.
  5. INSERT the second working remote head key into the Ignition.
  6. TURN the Ignition to the ON position for at least three (3) seconds but no longer than fifteen (15) seconds.
  7. After ten (10) seconds a chime will sound and the vehicle’s security light will begin to flash.
  8. TURN the Ignition to the LOCK position and REMOVE the second remote head key.
  9. INSERT the NEW remote head key into the Ignition.
  10. TURN the Ignition to the ON position within 60 seconds.
  11. After ten (10) seconds a single chime will sound and the vehicle’s security light will stop flashing.
  12. The vehicle’s security light will turn ON again for three (3) seconds and OFF to indicate successful programming.
  13. Test all remotes. Programming is now complete. The remote and key are now both programmed.
  14. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Procedure #2 (Remote Head Keys WITHOUT Immobilizer Chip)
Step-by-Step How To Programming Instructions:

  1. ENTER the Vehicle and CLOSE all doors.
  2. INSERT key into Ignition.
  3. TURN the Ignition to the ON position (before cranking).
  4. PRESS and HOLD UNLOCK on a working remote head key for four (4) to ten (10) seconds.
  5. WHILE holding the UNLOCK button, PRESS the PANIC button UNTIL a chime sounds to indicate entry into Programming Mode.
  6. RELEASE both the PANIC and UNLOCK buttons.
  7. PRESS the LOCK and UNLOCK buttons simultaneously on the same remote until a chime is heard.
  8. Once the chime is heard, PRESS and RELEASE the UNLOCK button on that same remote.  Another chime will sound indicating successful programming of that remote. (This MUST be done within 30 seconds)
  9. WITHIN 30 seconds of Step 8, PRESS the LOCK and UNLOCK buttons on any other remotes to be programmed.  RELEASE the buttons when the chime is heard.  Again, PRESS and RELEASE the UNLOCK button on that remote.  Another chime will sound indicating successful programming of that remote.
  10. REPEAT Step 9 for ALL remotes (even working remote head keys) that you want to work with your Vehicle.Test all remotes.
  11. Programming is now complete. The remote and key are now both programmed.
  12. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Save On Your Purchase by Sharing with Friends!
You about to save some mega moolah with NorthCoast Keyless! Save even more by sharing your purchase with friends and you will receive a special discount at checkout!


If you have any difficulties with programming the remote you ordered from us to your vehicle, check out our FAQ Page for common questions, mistakes, and solutions to programming keyless entry remotes to your vehicle. Always feel free to contact us at support@northcoastkeyless.com.

View our entire catalog of FREE Dodge keyless entry remote programming instructions!

Need to buy a 2010 Dodge Dakota keyless entry remote fob? We’ve got you covered!

Need a new battery for your 2010 Dodge Dakota keyless entry remote fob? Check out our lineup of keyless remote batteries!

Our Free Programming Instructions Disclaimer can be found on the NorthCoast Keyless FAQ page.

Leave a Reply

Your email address will not be published.