2009 Chevrolet Tahoe Keyless Entry Remote Programming Instructions

Step-by-Step How To Programming Instructions for a 2009 Chevrolet Chevy Tahoe Keyless Entry Remote Fob

We strive to provide convenience to our customers with free keyless entry remote programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Step-by-Step How To Programming & Memory Clearing Instructions for a 2009 Chevrolet Tahoe Keyless Entry Remote Fob

Verify that this important information is on the back of your remote before using these programming instructions.

FCC ID: OUC60221 OR OUC60270

Factory Part No: 15913421, 20868672, 20952474, 22936098, 15913420, 20868852, 20669056, 22936099, 15913427, 22756462, 20869057, 15857840, 22951510, 15913415, 25839476, 20859053, 25836188, 20869963, 20952477, 22936101

Programming Notes:

Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.

Keyless Entry System Memory Clearing Instructions are noted in the dark blue colored steps below.

Procedure #1 (Vehicles with Driver Information Center Button – Located to the Right of Steering Wheel)

Step-by-Step How To Programming Instructions:

  1. INSERT key and TURN the ignition to ON (just shy of starting vehicle without cranking engine).
  2. PRESS vehicle information button until “PRESS TO RELEARN REMOTE KEY” is displayed.
  3. PRESS the Set/Reset Button (Button will have a checkmark) until “REMOTE KEY LEARNING ACTIVE” is displayed. Vehicle is now in Programming Mode.
  4. PRESS and HOLD LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will sound indicating successful programming.
  5. REPEAT Step 4 to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.
  6. To EXIT Pogramming Mode TURN ignition OFF & REMOVE key.
  7. Test all remotes. Programming is now complete.
  8. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Procedure #2 (Vehicles without Driver Information Center Button)

Step-by-Step How To Programming Instructions:

  1. INSERT key and TURN the ignition to ON (just shy of starting vehicle without cranking engine).
  2. PRESS the Trip Odometer Reset Button until “RELEARN REMOTE KEY” is displayed.
  3. PRESS and HOLD the Trip Odometer Reset Button for approximately 3 seconds until “REMOTE KEY LEARNING ACTIVE” displays. Vehicle is now in Programming Mode.
  4. PRESS and HOLD LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal will sound indicating successful programming.
  5. REPEAT Step 4 to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALL remotes including existing remotes.
  6. To EXIT Programming Mode TURN ignition OFF & REMOVE key.
  7. Test all remotes. Programming is now complete.
  8. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Save On Your Purchase by Sharing with Friends!
You about to save some mega moolah with NorthCoast Keyless! Save even more by sharing your purchase with friends and you will receive a special discount at checkout!


If you have any difficulties with programming the remote you ordered from us to your vehicle, check out our FAQ Page for common questions, mistakes, and solutions to programming keyless entry remotes to your vehicle. Always feel free to contact us at support@northcoastkeyless.com.

View our entire catalog of FREE Chevrolet keyless entry remote programming instructions!

Need to buy a 2009 Chevrolet Tahoe keyless entry remote fob? We’ve got you covered!

Need a new battery for your 2009 Chevrolet Tahoe keyless entry remote fob? We’ve got that too!

Remote Accessories

CR2032 Lithium Coin Battery

Rated 5.00 out of 5
Dealership: $8.00
$3.94

Our Free Programming Instructions Disclaimer can be found on the NorthCoast Keyless FAQ page.

Leave a Reply

Your email address will not be published.