2008 Dodge Charger Keyless Entry Remote Fob Programming Instructions

Step-by-Step How To Programming Instructions for a 2008 Dodge Charger Keyless Entry Remote Fob

We strive to provide convenience to our customers with free keyless entry remote programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Step-by-Step How To Programming & Memory Clearing Instructions for a 2008 Dodge Charger Keyless Entry Remote Fob

Verify that this important information is on the back of your remote before using these programming instructions.

FCC ID: Coming Soon

Factory Part No.: Coming Soon

Programming Notes:

Obtain all remote transmitters for this vehicle.

You will need at least two (2) working remote head or transponder keys in order to perform this procedure yourself without the help of a Professional.

Keyless Entry System Memory Clearing Instructions are noted in the dark blue colored steps below.

Step-by-Step How To Programming Instructions:

  1. INSERT the first working FOBIK remote key into Ignition.
  2. TURN Ignition to the ON position for at least three (3) to fifteen (15) seconds.
  3. TURN Ignition to the OFF position and REMOVE key.
  4. WITHIN fifteen (15) seconds, INSERT second working FOBIK remote key into Ignition.
  5. TURN Ignition to the ON position.
  6. After ten (10) seconds a chime will sound and the Immobilizer Warning Lamp will flash indicating entry into Programming Mode.
  7. TURN Ignition OFF and REMOVE second working FOBIK remote key.
  8. WITHIN 60 seconds INSERT NEW FOBIK remote key into Ignition.
  9. TURN Ignition to the ON position.
  10. After ten (10) seconds a chime will sound and the Immobilizer Warning Lamp will flash indicating successful programming of that remote.
  11. TURN Ignition to the OFF position and REMOVE key.
  12. REPEAT Steps 8-11 for any additional FOBIK remote keys to be programmed to your Vehicle.
  13. Test all remotes. Programming is now complete. The remote and key are now both programmed.
  14. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Save On Your Purchase by Sharing with Friends!
You about to save some mega moolah with NorthCoast Keyless! Save even more by sharing your purchase with friends and you will receive a special discount at checkout!


If you have any difficulties with programming the remote you ordered from us to your vehicle, check out our FAQ Page for common questions, mistakes, and solutions to programming keyless entry remotes to your vehicle. Always feel free to contact us at support@northcoastkeyless.com.

View our entire catalog of FREE Dodge keyless entry remote programming instructions!

Need to buy a 2008 Dodge Charger keyless entry remote fob? We’re working hard to get this in stock for you!

[Coming Soon]

Need a new battery for your 2008 Dodge Charger keyless entry remote fob? We’ve got those as well!

Remote Accessories

CR2032 Lithium Coin Battery

Rated 5.00 out of 5
Dealership: $8.00
$3.94

Our Free Programming Instructions Disclaimer can be found on the NorthCoast Keyless FAQ page.

Leave a Reply

Your email address will not be published.