2007 Ford Escape Hybrid Keyless Entry Remote Programming Instructions

Easy to Follow Step-by-step Instructions for How To Program a 2007 Ford Escape Hybrid Keyless Entry Remote Fob

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Step-by-Step Programming Instructions for a 2007 Ford Escape Hybrid Keyless Entry Remote Fob

Verify that this important information is on the the back of your remote before using these programming instructions.

FCC ID: Coming Soon

Factory Part No: Coming Soon

Programming Notes:

Use Procedure #1 for Remote Head Keys and Procedure #2 for Remotes.

Procedure #1 (Remote Head Keys)

Programming Notes:

You MUST have two (2) working transponder keys (keys that start your vehicle) in order to perform this programming procedure without the assistance of a professional.

The key to be programming in this procedure MUST be cut prior to beginning this programming procedure.

Keyless Entry System Memory Clearing Instructions are noted in the dark blue colored steps below.

Step-by-Step How To Programming Instructions:

  1. INSERT a working transponder key into the ignition cylinder.
  2. TURN the ignition cylinder to ON (Position 3) for five (5) seconds and then back to OFF (Position 1).
  3. REMOVE the first transponder key and INSERT the second working transponder within ten (10) seconds.  
  4. TURN the ignition cylinder to ON (Position 3) for five (5) seconds and then back to OFF (Position 1).
  5. REMOVE the second transponder key and INSERT the new unprogrammed transponder key within twenty (20) seconds and TURN to ON (Position 3) for six (6) seconds and TURN back to OFF (Position 1).
  6. The Theft Indicator light will respond by lighting up for three (3) seconds to indicate successful programming of the new transponder key.
  7. Test all remotes. Programming is complete.
  8. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
  9. If the remote portion of the remote head key DID NOT program with the above procedure, use Procedure #2 below to program the remote portion of the remote head key.

Procedure #2 (Remotes)

Programming Notes:

Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.

Do NOT press the brake pedal during this procedure.

Keyless Entry System Memory Clearing Instructions are noted in the dark blue colored steps below.

Step-by-Step How To Programming Instructions:

  1. INSERT key and TURN Ignition from OFF to RUN 8 times within 10 seconds, with the 4th time ending in RUN. Door locks will cycle to confirm successful entry into Programming Mode. (OFF is the position where you can remove your key, RUN is the position just shy of starting your car.)
  2. Within 20 seconds PRESS any button on the first keyless remote to be programmed. Door locks will cycle to confirm successful programming. If you only have one remote then skip to Step 4.
  3. Within 20 seconds, PRESS any button on the second keyless remote. Door locks will cycle again to confirm programming. Repeat Step 3 for any additional remotes to be programmed.
  4. TURN Ignition to OFF. Locks will cycle to indicate exit of Programming Mode.
  5. Test all remotes. Programming is complete.
  6. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

If you have any difficulties with programming the remote you ordered from us to your vehicle, contact us at support@northcoastkeyless.com.

View our entire catalog of FREE Ford keyless entry remote fob programming instructions!

Need to buy a 2007 Ford Escape Hybrid keyless entry remote? We’re working hard to get that in stock for you!

Need a new battery for your 2007 Ford Escape Hybrid keyless entry remote? Check out our lineup of keyless entry remote batteries!

[wc-social-coupon]

Our Free Programming Instructions Disclaimer can be found on the NorthCoast Keyless FAQ page.

Leave a Reply

Your email address will not be published.

{"cart_token":"","hash":"","cart_data":""}