2006 Honda Element Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

2006 Honda Element

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2006 Honda Element

Time needed: 5 minutes.

Step-By-Step How To Programming Instructions

  1. Prepare Vehicle

    ENTER the vehicle and CLOSE and UNLOCK ALL doors.

  2. Prepare Remote(s)

    INSERT the key into the Ignition, HOLD one remote in your left hand with additional remotes close by.

  3. Enter Programming Mode – Step 1

    EACH of the following steps MUST be completed within 5 seconds of one another. REPEAT these steps 3 times:

    a. TURN the Ignition to the ON (II) position.

    b. PRESS and HOLD the LOCK button on the remote for approximately 1 second.

    c. TURN the Ignition to the LOCK (0) position.

  4. Enter Programming Mode – Step 2

    TURN the Ignition to the ON (II) position.

  5. Enter Programming Mode – Step 3

    PRESS the LOCK button on the same remote. The door locks will cycle LOCK / UNLOCK indicating the vehicle has successfully entered Programming Mode.

  6. Program Remote

    WITHIN 5 seconds, PRESS the LOCK button AGAIN on the same remote. The door locks should cycle again LOCK / UNLOCK indicating the vehicle has successfully PROGRAMMED the remote.

  7. Program Additional Remotes

    To Program any additional remotes to your vehicle, REPEAT Step 6 with each additional remote one after another WITHIN 5 seconds of one another.

  8. EXIT Programming Mode

    TURN the ignition to LOCK (0) and REMOVE the key to EXIT Programming Mode.

  9. Trunk Release Programming

    After successful programming, if your remote has a TRUNK RELEASE Button — you will need to PRESS and HOLD that button down for 5-10 seconds for that function to begin operation.

  10. Test Remotes

    EXIT vehicle, CLOSE all doors and TEST all remotes. Programming is now complete.

  11. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.
  • If you have a remote head key with a transponder chip, this procedure will ONLY program the remote portion. You’ll need a Professional Auto Locksmith to cut and program the transponder key that will start the vehicle.
  • If you have a remote head key without a transponder chip, this procedure WILL work for your vehicle.
  • This procedure DOES NOT work for smart proximity remote key fobs.
  • You MAY program up to 3 remotes to your vehicle.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

2006 Honda Element

Out of stock
Dealership: $125.00
Out of stock
NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published.