2006 Chrysler Sebring Keyless Entry Remote Programming Instructions

Step-by-Step How To Programming Instructions for a 2006 Chrysler Sebring Coupe & Sedan Keyless Entry Remote Fob

We strive to provide convenience to our customers with free keyless entry remote programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Step-by-Step How To Programming & Memory Clearing Instructions for a 2001 Chrysler Sebring Coupe & Sedan Keyless Entry Remote Fob

Verify that this important information is on the back of your remote before using these programming instructions.

FCC ID: GQ43VT17T

Factory Part No.: 04602260

Chrysler Sebring Sedan Programming Instructions

Programming Notes:

Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.

You MUST have at least one working remote in order for this procedure to work.  If you don’t have at least one working remote, you MUST have the remote programmed by an Automotive Locksmith.

If Procedure #1 does not work for your vehicle, try Procedure #2.

Keyless Entry System Memory Clearing Instructions are noted in the dark blue colored steps below.

Procedure #1
Step-by-Step How To Programming Instructions:

  1. INSERT a key into the Ignition and TURN the Ignition to the ON position (just before cranking).
  2. PRESS and HOLD the UNLOCK button on a working remote for four (4) to ten (10) seconds.
  3. While holding the UNLOCK button, PRESS the PANIC button for one (1) second and RELEASE both buttons at the same time.  A chime will sound within three (3) seconds to indicate entry into Programming Mode.
  4. PRESS ANY button on the same remote until you hear another chime indicating that the remote has been successfully re-programmed.  This Step MUST be done within 30 seconds of hearing the first chime in Step 3.
  5. Within the next 30 seconds PRESS ANY button on the next remote to be programmed to your Vehicle.
  6. REPEAT Step 5 for any additional remotes to be programmed to your Vehicle.
  7. Test all remotes. Programming is now complete.
  8. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Procedure #2
Step-by-Step How To Programming Instructions:

  1. Using a working remote, PRESS the LOCK button five (5) times at two (2) second intervals to re-synchronize the remote.
  2. INSERT a key into the Ignition and TURN the Ignition to the ON position (just before cranking).
  3. PRESS and HOLD the UNLOCK button on a working remote for four (4) to ten (10) seconds.
  4. While holding the UNLOCK button, PRESS the PANIC button for one (1) second and RELEASE both buttons at the same time.  A chime will sound within three (3) seconds to indicate entry into Programming Mode.
  5. PRESS the LOCK and UNLOCK buttons simultaneously on the same remote then RELEASE.  The Vehicle will chime to indicate that it has recognized the remote.
  6. PRESS and RELEASE the UNLOCK button on the same remote.  The Vehicle will again chime to indicate successful programming of that remote.  This Step MUST be done within 30 seconds of hearing the first chime in Step 3.
  7. Within 30 seconds of completing Step 5, PRESS the LOCK and UNLOCK buttons on the next remote to be programmed and then RELEASE.  You will again hear a chime indicating that the Vehicle has recognized the remote.
  8. PRESS and RELEASE the UNLOCK button on the remote.  The Vehicle will again chime to indicate successful programming of that remote.
  9. REPEAT Steps 6-7 on any additional remotes to be programmed to your Vehicle.
  10. Test all remotes. Programming is now complete.
  11. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Chrysler Sebring Coupe Programming Instructions

Programming Notes:
Sorry, there are no keyless entry remote self-programming instructions for this vehicle. You must get an Automotive Locksmith to program the remote to your vehicle for you. If your vehicle requires professional programming we tell you, so you’re not left with any doubt and searching all over the internet. It’s still much cheaper to purchase a remote from NorthCoast Keyless and get it programmed by a Locksmith rather than buying from a Dealership! We strongly recommend calling a Local Auto Locksmith for help here. Find a Local Automotive Locksmith instantly by using our search tool below.

Find a Local Auto Locksmith

For best results, just search "auto locksmith [YOUR ZIPCODE]" OR "auto locksmith near me"
Custom Search
Save On Your Purchase by Sharing with Friends!
You about to save some mega moolah with NorthCoast Keyless! Save even more by sharing your purchase with friends and you will receive a special discount at checkout!


If you have any difficulties with programming the remote you ordered from us to your vehicle, check out our FAQ Page for common questions, mistakes, and solutions to programming keyless entry remotes to your vehicle. Always feel free to contact us at support@northcoastkeyless.com.

View our entire catalog of FREE Chrysler keyless entry remote programming instructions!

Need to buy a 2006 Chrysler Sebring Coupe keyless entry remote fob? We’re working hard to get this in stock for you!

Need a new battery for your 2006 Chrysler Sebring Coupe keyless entry remote fob? Check out our lineup of keyless entry remote batteries!

Our Free Programming Instructions Disclaimer can be found on the NorthCoast Keyless FAQ page.

Leave a Reply

Your email address will not be published.