Easy to Follow Step-by-step Key fob remote Programming Instructions
2005 Mercury Montego
We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.
Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!
Free Key Fob Remote Programming Instructions for a 2005 Mercury Montego
FORD LINCOLN MERCURY KEY FOB REMOTES STEP-BY-STEP HOW TO PROGRAMMING INSTRUCTIONS
Minutes 5 minutes
CLOSE and UNLOCK vehicle using power door locks.
Enter Programming Mode
INSERT key into Ignition and TURN from OFF to RUN 8 times within 10 seconds, with the 8th time ending in RUN. Door locks will cycle to confirm Programming Mode.
WITHIN 20 seconds PRESS ANY button on first keyless remote fob. Door locks will cycle LOCK/UNLOCK to confirm programming.
Program Additional Remote(s)
REPEAT the previous step IMMEDIATELY for any other remotes to be programmed to your vehicle.
Exit Programming Mode
TURN Ignition to OFF. Locks will again cycle to indicate end of programming mode.
TEST all remotes. Programming is now complete.
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
- Key Fob Remote(s) that you want to program to your vehicle.
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.
- You may clear your keyless entry system memory by entering programming mode as shown in the steps above.
Note: If your vehicle cannot enter programming mode, then you cannot program any remote. This indicates either no keyless entry installed on the vehicle or a defective keyless entry receiver module.
If you have any difficulties with programming your vehicles, contact us at [email protected].
Key fob remotes
2005 Mercury Montego
2005 Mercury Montego Key Fob Remote (FCC: CWTWB1U313, CWTWB1U343, P/N: 3W7Z-15K601-AA, 3W73-15K601-AA)
MONEY BACK GUARANTEE
We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.
FAST & FREE SHIPPING
ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!
Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.
SAVE 70% OVER DEALERSHIPS
We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!
- We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
- If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.