2005 Honda CR-V Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

2005 Honda CR-V

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2005 Honda CR-V


HONDA KEY FOB REMOTES STEP-BY-STEP HOW TO PROGRAMMING INSTRUCTIONS

Minutes 5 minutes

  1. Prepare Vehicle

    TURN Ignition to the ON (II) position (just shy of cranking engine).

  2. Enter Programming Mode

    PRESS and HOLD the VALET/DISARM Button located between the AM/FM and CD/TAPE Buttons. The vehicle will respond by cycling the door locks LOCK/UNLOCK, indicating successful entry into Programming Mode. HOLD the VALET/DISARM Button UNTIL instructed to RELEASE.

  3. Program Remote(s)

    WITHIN 5 seconds, PRESS the LOCK or UNLOCK Button on the remote. The vehicle will respond by cycling the door locks LOCK/UNLOCK, indicating successful programming of the remote.

  4. Program Additional Remote(s)

    WITHIN 10 seconds, REPEAT Step 3 to program any additional remotes.

  5. Exit Programming Mode

    RELEASE the VALET/DISARM Button to EXIT Programming Mode.

  6. Test Remotes

    TEST all remotes. Programming is now complete.

  7. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Supply:

  • Key Fob Remote(s) that you want to program to your vehicle.

Tools:

  • None

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.
  • You MUST have the original factory radio for this procedure to work.

HONDA / ACURA KEY FOB REMOTES STEP-BY-STEP HOW TO PROGRAMMING INSTRUCTIONS

Minutes 5 minutes

  1. Prepare Vehicle

    ENTER the vehicle and CLOSE and UNLOCK ALL doors.

  2. Prepare Remote(s)

    INSERT the key into the Ignition, HOLD one remote in your left hand with additional remotes close by.

  3. Enter Programming Mode – Step 1

    EACH of the following steps MUST be completed within 5 seconds of one another. REPEAT these steps 3 times:

    a. TURN the Ignition to the ON (II) position.

    b. PRESS and HOLD the LOCK button on the remote for approximately 1 second.

    c. TURN the Ignition to the LOCK (0) position.

  4. Enter Programming Mode – Step 2

    TURN the Ignition to the ON (II) position.

  5. Enter Programming Mode – Step 3

    PRESS the LOCK button on the same remote. The door locks will cycle LOCK / UNLOCK indicating the vehicle has successfully entered Programming Mode.

  6. Program Remote(s)

    WITHIN 5 seconds, PRESS the LOCK button AGAIN on the same remote. The door locks should cycle again LOCK / UNLOCK indicating the vehicle has successfully PROGRAMMED the remote.

  7. Program Additional Remote(s)

    To Program any additional remotes to your vehicle, REPEAT Step 6 with each additional remote one after another WITHIN 5 seconds of one another.

  8. Exit Programming Mode

    TURN the ignition to LOCK (0) and REMOVE the key to EXIT Programming Mode.

  9. Trunk Release Programming

    After successful programming, if your remote has a TRUNK RELEASE Button — you will need to PRESS and HOLD that button down for 5-10 seconds for that function to begin operation.

  10. Test Remote(s)

    EXIT vehicle, CLOSE all doors and TEST all remotes. Programming is now complete.

  11. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Supply:

  • Key Fob Remote(s) that you want to program to your vehicle.

Tools:

  • None

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.
  • If you have a remote head key with a transponder chip, this procedure will ONLY program the remote portion. You’ll need a Professional Auto Locksmith to cut and program the transponder key that will start the vehicle.
  • If you have a remote head key without a transponder chip, this procedure WILL work for your vehicle.
  • This procedure DOES NOT work for smart proximity remote key fobs.
  • You MAY program up to 3 remotes to your vehicle.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

2005 Honda CR-V

OEM Electronic
NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published. Required fields are marked *