Easy to Follow Step-by-step Key fob remote Programming Instructions
2004 Hyundai Santa Fe
We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.
Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!
Free Key Fob Remote Programming Instructions for a 2004 Hyundai Santa Fe
Time needed: 5 minutes.
KEY FOB REMOTE
Step-By-Step How To Programming Instructions
- Enter Programming Mode – Step 1
REMOVE dashboard fascia and LOCATE the alarm system control module. ENSURE that the memory switch is in the OFF position.
Santa Fe / XG300 / XG350: Access alarm system control module located behind driver’s side fascia panel (Fig 100573)
Elantra / Sonata: Access central locking signal control module located behind fascia, center (Fig 100645) - Enter Programming Mode – Step 2
INSERT key into the ignition and TURN ignition to the ON position.
NOTE: Some have reported that leaving the key out of the ignition works for their vehicle. If this procedure does not work for you, try skipping this step. - Enter Programming Mode – Step 3
After 5 seconds SLIDE the switch on the alarm system control module to the SET position.
- Program Remote
PRESS the LOCK button on the first remote to be programmed.
- Program Additional Remote
If programming a second remote PRESS the LOCK button on the second remote.
- Exit Programming Mode
SLIDE the switch on the alarm system control module to the OFF position. TURN the ignition OFF and REMOVE key and REPLACE center fascia to EXIT Programming Mode.
- Test Remotes
TEST all remotes. Programming is now complete.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Programming Notes:
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain ALL remote transmitters for this vehicle.
- Keyless Entry Control Module Location:
- Santa Fe / XG300 / XG350: Access alarm system control module located behind driver’s side fascia panel (Fig 100573)
- Elantra / Sonata: Access central locking signal control module located behind fascia, center (Fig 100645)
- Important: Please check to ensure you are able to find the Alarm Control Module and associated SET Switch mentioned in the instructions, otherwise you will not be able to perform the self-programming instructions and will be required to have an Automotive Locksmith program the key fob for you.
- Alternative: If these instructions do not appear to work, try performing them again WITHOUT inserting the key into the ignition, as Steps 2 and 7 indicate, to see if this resolves the issue.
If you have any difficulties with programming your vehicles, contact us at [email protected].
Key fob remotes
2004 Hyundai Santa Fe
MONEY BACK GUARANTEE
We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.
FAST & FREE SHIPPING
ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!
CUSTOMER SUPPORT
Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.
SAVE 70% OVER DEALERSHIPS
We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!
- We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
- If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.
Love your instructions, very user friendly and save money. Also make me feel good doing it myself.
Thank you.
Joe
how to program with no on & off switch? my 2004 hyundai santa fe no off or set posiion is there any way with out going to dealer or obd programming device.
Hi Albert, Thanks for reaching out here. If you don’t have the ON/OFF switch, it means that your vehicle isn’t equipped with keyless entry. If you are certain that it is equipped, then we recommend calling a local Auto Locksmith for support programming the remote for you. Take care.
I’ve been researching this keyfob programming for the 2004 santa fe. If there is no set switch it has to be programmed through the OBD port. I’ve searched everywhere for a switch, even found the alarm box and antenna, no switch. i’m replacing a lost key fob, so I know the car came with one originally.
I have tried several times with the included instructions and no luck. Any other tips?
It doesn’t work for me either. They keep telling me to send it to a locksmith or dealer
I posted a question regarding how I can get the code for remote start on my 2004 Hyundai Santa Fe. my alarm works fine, I just don’t know what buttons to push and how many times to activate the start. Could someone out there please respond if you know what I need??.
bought the suv from my mom who said she had the alarm taken out because she kept losing the fob.
but it got me thinking so i watched a y.t. video by the “basic d.i.y. guy” and he had a link to you guys!
couldn’t believe how easy it was, thanks to both of you, it works perfectly.
p. quinn
I tried to program using the directions given and it did not work. However when I did the programming with NO key in the ignition it worked perfectly. Remote works well
Thanks guys. No way do I even pull into a dealership with my old Santa Fe! ( I needed to use the NO-KEY approach for it to work).
Please advise how to remove “hijack” feature of the alarm system as the car locked while the key in and engine running. Thanks.
Hi, I d followed both your and Hyundai instructions neither worked Dealer says your fob is not the correct one I doubt they are right any suggestions replaced the alarm control module also