2004 Audi A4 Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

2004 Audi A4

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2004 Audi A4


AUDI FLIP KEY FOB REMOTES (REMOTE PORTION)
STEP-BY-STEP HOW TO PROGRAMMING INSTRUCTIONS

Minutes 5 minutes

  1. Enter Programming Mode – Step 1

    INSERT key into the Ignition and TURN the Ignition switch to the ON position (just shy of cranking engine).

  2. Enter Programming Mode – Step 2

    EXIT vehicle and CLOSE Driver’s door.

  3. Enter Programming Mode – Step 3

    INSERT the second key into the door lock on the Driver’s door and TURN the key to the LOCK position. HOLD key in this position.

  4. Enter Programming Mode – Step 4

    WITHIN 2 seconds, PRESS and HOLD the UNLOCK button on the first remote to be programmed for 2 seconds. The vehicle lights will flash ONCE to signal successful entry into Programming Mode.

  5. Program Remote(s)

    WAIT 2 seconds and PRESS the UNLOCK button once more on the remote. The vehicle lights will flash ONCE to signal successful programming of the remote.

  6. Finalize Programming

    UNLOCK Driver’s door with key from the outside.

  7. Exit Programming Mode

    REMOVE key from Ignition and CLOSE Driver’s door to EXIT Programming Mode.

  8. Program Additional Remote(s)

    REPEAT Steps 3-6 to program additional remotes to the vehicle.

  9. Test Remotes

    TEST all remotes. Programming is now complete.

  10. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Supply:

  • Key Fob Remote(s) that you want to program to your vehicle.

Tools:

  • None

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.
  • You will need at least 2 remotes/keys in order to perform this procedure yourself without the help of a Professional.
  • You can program up to 4 remotes to this vehicle’s keyless entry system Memory. 

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

2004 Audi A4

OEM Electronic
OEM Electronic
NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

1 thoughts on “2004 Audi A4 Keyless Entry Remote Fob Programming Instructions

Leave a Reply

Your email address will not be published. Required fields are marked *