2003 Toyota Camry Solara Keyless Entry Remote Programming Instructions

Toyota Keyless Entry Remote Programming Instructions

Easy to Follow Step-by-step Instructions for Programming a 2003 Toyota Camry Solara Keyless Entry Remote

We strive to provide convenience to our customers with free keyless entry remote programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Step-by-Step Programming Instructions for a 2003 Toyota Camry Solara Keyless Entry Remote

Verify that this important information is on the the back of your remote before using these programming instructions.

FCC ID: GQ43VT14T

Factory Part No: 89742-AA030

Canada Part No: N/A

Step-by-Step Programming Instructions:

  1. Start with the key out of the ignition, drivers door is open all others closed and
    drivers door is unlocked.
  2. Perform these steps within 5 seconds:A. Insert the key into the ignition(Do NOT Turn) Pull key out.
    B. Insert the key into the ignition(Do NOT Turn) Pull key out.
  3. Perform these steps within 40 seconds:A. Close then open the drivers door.
    B. Close then open the drivers door.
    C. Insert the key into the ignition(Do NOT Turn) Pull key out.
  4. Perform these steps within 40 seconds:A. Close then open the drivers door.
    B. Close then open the drivers door.
    C. Insert the key into ignition and leave it in ignition.
    D. Close the drivers door.
    E. Turn the ignition to ON (Do NOT Start) then back to OFF.
    F. Remove the key from the ignition.
  5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode.Return to step 1 if the locks do not cycle at this point.
  6. Perform these steps within 40 seconds:A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.
    B. Immediately after letting go of the lock and unlock buttons,
    Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door
    locks should lock and then unlock once indicating successful programming. If
    the door locks cycle twice, repeat steps A and B in step 6 as the remote was
    not accepted.
    C. Repeat steps A and B in step 6 for each new remote.
  7. Open drivers door.

If you have any difficulties with programming your vehicles, contact us at support@northcoastkeyless.com.

 

View our entire catalog of FREE Toyota keyless entry remote programming instructions!

Need a 2003 Toyota Camry Solara keyless entry remote? We’ve got you covered!

Need a new battery for your 2003 Toyota Camry Solara keyless entry remote? We’ve got that too!

Remote Accessories

CR2032 Lithium Coin Battery

Rated 5.00 out of 5
Dealership: $8.00
$3.94
Save On Your Purchase by Sharing with Friends!
You about to save some mega moolah with NorthCoast Keyless! Save even more by sharing your purchase with friends and you will receive a special discount at checkout!


 

Our Free Programming Instructions Disclaimer can be found on the NorthCoast Keyless FAQ page.

Leave a Reply

Your email address will not be published.