2003 Jeep Liberty Keyless Entry Remote Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

2003 Jeep Liberty

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2003 Jeep Liberty


Time needed: 5 minutes.


Step-By-Step How To Key Fob Programming Instructions

  1. Inset Key

    INSERT a key into the Ignition and TURN the Ignition to the ON position (just before cranking).

  2. Enter Programming Mode – Step 1

    PRESS and HOLD the UNLOCK button on a working remote for 4-10 seconds.

  3. Enter Programming Mode – Step 2

    WHILE holding the UNLOCK button, PRESS the PANIC button for 1 second and RELEASE both buttons at the same time. A chime will sound within 3 seconds to indicate successful entry into Programming Mode.

  4. Program Remote – Step 1

    PRESS ANY button on the same remote until you hear another chime indicating that the remote has been successfully re-programmed. This Step MUST be done within 30 seconds of hearing the first chime in Step 3.

  5. Program Remote – Step 2

    WITHIN 30 seconds PRESS ANY button on a NEW remote to be programmed to your vehicle.

  6. Program Additional Remote

    REPEAT Step 5 to program any additional remotes to your vehicle.

  7. Exit Programming Mode

    TURN Ignition to OFF and REMOVE key to EXIT Programming Mode.

  8. Test Remotes

    TEST all remotes. Programming is complete.

  9. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Time needed: 5 minutes.


Step-By-Step How To Key Fob Programming Instructions

  1. Sync Existing Remote

    Using an existing working remote, PRESS the LOCK button 5 times at 2 second intervals to re-synchronize the remote.

  2. Inset Key

    INSERT a key into the Ignition and TURN the Ignition to the ON position (just before cranking).

  3. Enter Programming Mode – Step 1

    PRESS and HOLD the UNLOCK button on a working remote for 4-10 seconds.

  4. Enter Programming Mode – Step 2

    While holding the UNLOCK button, PRESS the PANIC button for 1 second and RELEASE both buttons at the same time. A chime will sound within 3 seconds to indicate successful entry into Programming Mode.

  5. Program Remote – Step 1

    PRESS the LOCK and UNLOCK buttons simultaneously on the same remote then RELEASE. The vehicle will chime to indicate that it has recognized the remote.

  6. Program Remote – Step 2

    PRESS and RELEASE the UNLOCK button on the same remote. The vehicle will again chime to indicate successful programming of that remote. This Step MUST be done within 30 seconds of hearing the first chime in Step 3.

  7. Program Remote – Step 3

    WITHIN 30 seconds of completing Step 5, PRESS the LOCK and UNLOCK buttons on the next remote to be programmed and then RELEASE. You will again hear a chime indicating that the vehicle has recognized the remote.

  8. Program Remote – Step 4

    PRESS and RELEASE the UNLOCK button on the remote. The vehicle will again chime to indicate successful programming of that remote.

  9. Program Additional Remote

    REPEAT Steps 6-8 to program any additional remotes to your vehicle.

  10. Exit Programming Mode

    TURN Ignition to OFF and REMOVE key to EXIT Programming Mode.

  11. Test Remotes

    TEST all remotes. Programming is complete.

  12. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.
  • You MUST have at least one working remote in order for this procedure to work. If you don’t have at least one working remote, you MUST have the remote programmed by an Automotive Locksmith.
  • If Procedure #1 does not work for your vehicle, try Procedure #2.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

2003 Jeep Liberty

NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published.

{"cart_token":"","hash":"","cart_data":""}