2002 Mitsubishi Mirage Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

2002 Mitsubishi Mirage

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 2002 Mitsubishi Mirage


Key Fob Remote Step-By-Step How To Programming Instructions

Minutes 5 minutes

  1. Enter Programming Mode – Step 1

    OPEN the Driver’s side door.

  2. Enter Programming Mode – Step 2

    INSERT your key into the ignition cylinder and TURN to the ON position (just shy of cranking the engine).

  3. Enter Programming Mode – Step 3

    PRESS and HOLD the “Programming/Override” button (located under the driver’s side dashboard). Within 20 seconds, the vehicle will cycle the door locks and the horn will sound 3 times to indicate successful entry into programming mode.

    Do NOT release the “Programming/Override” button.

  4. Program Remote(s)

    PRESS the Lock OR Unlock button on the first remote to be programmed. The vehicle will respond by cycline the door locks and the horn will sound 1 time to indicate successful programming.

    REPEAT this step to program up to 3 additional remotes (total of 4) to the vehicle.

  5. Exit Programming Mode

    RELEASE the “Programming/Override” button and TURN the ignition to OFF.

  6. Test Remote(s)

    TEST all remotes. Programming is now complete.

  7. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Supply:

  • Key Fob Remote(s) that you want to program to your vehicle.

Tools:

  • None

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.
  • You may clear your keyless entry system memory by entering programming mode as shown in the steps above.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

2002 Mitsubishi Mirage

NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published. Required fields are marked *