2000 Toyota Camry Keyless Entry Remote Programming Instructions

Toyota Keyless Entry Remote Programming Instructions

Easy to Follow Step-by-step Instructions for Programming a 2000 Toyota Camry Keyless Entry Remote

We strive to provide convenience to our customers with free keyless entry remote programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Step-by-Step Programming Instructions for a 2000 Toyota Camry Keyless Entry Remote

Verify that this important information is on the the back of your remote before using these programming instructions.

FCC ID: GQ43VT14T, ELVATDD, ELVAT1B

Factory Part No: 88LP0065, 89742-06010

Canada Part No: 1470 102 849

Procedure #1 – Factory Installed Keyless Entry System
Step-by-Step Programming Instructions:

    1. Start with key out of the ignition, drivers door is open all others closed and drivers door is unlocked.
    2. Insert key into ignition (Do not turn) and pull it out.
    3. Perform these steps within 40 seconds:A. Using the power door lock switch on drivers door perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second.
      (1 cycle = 1 lock and 1 unlock.)
      B. Close, then open drivers door.
    4. Perform these steps within 40 seconds:A. Using the power door lock switch on drivers door perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second.
      (1 cycle = 1 lock and 1 unlock.)
      B. Insert the key in the ignition cylinder.
      C. Turn the ignition to ON (Do NOT Start) then back to OFF.
      D. Turn the ignition to ON (Do NOT Start) then back to OFF.
      E. Remove the key from the ignition.
    5. Within 3 seconds the power door locks should cycle automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point.
    6. Perform these steps within 40 seconds:A. Press the lock and unlock buttons on the remote simultaneously for 1 second.
      B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds the door locks should cycle once indicating successful programming. If the door locks don’t cycle or
      cycle twice, repeat steps A and B, your remote has not been accepted.
      C. Repeat steps A and B in step 6 for each new transmitter.
    7. Open drivers door. Test all remotes. Programming is complete.
    8. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.Close driver door.

Procedure #2 – Aftermarket / Dealer Installed Keyless Entry System
Step-by-Step How To Programming Instructions:

Toyota-After-1Toyota-After-2

Important: For MOST vehicles, the ECU Programming Receiver is located UNDERNEATH either the Driver or Passenger front seats. For SOME vehicles, it is located BEHIND the Driver’s Dash and can be accessed by prying out the black faceplate (5”x3”) behind the mirror control switch.

  1. INSERT the key INTO the Ignition and TURN the Ignition to the ON position.
  2. LOCATE the ECU; PRESS and HOLD the ECU Programming Switch for three (3) seconds (refer to Owner’s Manual for location). If done correctly, the Status Monitor LED will turn on for five (5) seconds to indicate entry into Programming Mode.
  3. PRESS and RELEASE either the LOCK or UNLOCK button on the remote to be programmed. The Status Monitor LED will turn OFF and the vehicle will sound and flash the exterior lights to signal successful programming of the remote.
  4. REPEAT Steps 2-3 to program additional remotes.
  5. TURN OFF the Ignition to exit Programming Mode.
  6. Test all remotes. Programming is now complete.
  7. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

If you have any difficulties with programming your vehicles, contact us at support@northcoastkeyless.com.

 

View our entire catalog of FREE Toyota keyless entry remote programming instructions!

Need a 2000 Toyota Camry keyless entry remote? We’ve got you covered!

Need a new battery for your 2000 Toyota Camry keyless entry remote? Check out our lineup of keyless remote batteries.

Save On Your Purchase by Sharing with Friends!
You about to save some mega moolah with NorthCoast Keyless! Save even more by sharing your purchase with friends and you will receive a special discount at checkout!


 

NorthCoast Keyless Free Programming Instructions Disclaimer:

  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at support@northcoastkeyless.com and we’ll make sure that you’re taken care of.

2 thoughts on “2000 Toyota Camry Keyless Entry Remote Programming Instructions

  1. Ken Y Liu says:

    Hello,

    This is Ken. I am looking for a remote that fits my Toyota Camry LE 1999. When I was checking this following product, there is no self-programming instruction for 1999 camry. Need to help to solve the problem if this remote will work nicely for my car before purchasing. Thanks!

    1998-2006 TOYOTA CAMRY AFTERMARKET DEALER INSTALLED KEYLESS ENTRY REMOTE (FCC ID: ELVATDD / ELVAT1B)

  2. Ric says:

    Thank you, these instructions worked perfectly. Just finished replacing the driver’s side rear view mirror and had to disconnect teh control panel, couldn’t remember how to reprogram it…

Leave a Reply

Your email address will not be published.