2000 Buick Park Avenue Keyless Entry Remote Fob Programming Instructions

Step-by-Step How To Programming Instructions for a 2000 Buick Park Avenue Keyless Entry Remote Fob

We strive to provide convenience to our customers with free keyless entry remote programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Step-by-Step How To Programming & Memory Clearing Instructions for a 2000 Buick Park Avenue Keyless Entry Remote Fob

Verify that this important information is on the back of your remote before using these programming instructions.


Factory Part No: 25678792, 25628814, 25668603

Also Compatible with Part No(s): 25665574, 25665575, 25656444, 25656445, 15732805

Programming Notes:
Sorry, there are no keyless entry remote self-programming instructions for this vehicle. You must get an Automotive Locksmith to program the remote to your vehicle for you. If your vehicle requires professional programming we tell you, so you’re not left with any doubt and searching all over the internet. It’s still much cheaper to purchase a remote from NorthCoast Keyless and get it programmed by a Locksmith rather than buying from a Dealership! We strongly recommend calling a Local Auto Locksmith for help here. Find a Local Automotive Locksmith instantly by using our search tool below.

Find a Local Auto Locksmith

For best results, just search "auto locksmith [YOUR ZIPCODE]" OR "auto locksmith near me"
Custom Search
Save On Your Purchase by Sharing with Friends!
You about to save some mega moolah with NorthCoast Keyless! Save even more by sharing your purchase with friends and you will receive a special discount at checkout!


If you have any difficulties with programming the remote you ordered from us to your vehicle, check out our FAQ Page for common questions, mistakes, and solutions to programming keyless entry remotes to your vehicle. Always feel free to contact us at support@northcoastkeyless.com.

View our entire catalog of FREE Buick keyless entry remote programming instructions!

Need to buy a 2000 Buick Park Avenue keyless entry remote fob? We’ve got you covered!

Need a new battery for your 2000 Buick Park Avenue keyless entry remote fob? We’ve got that too!

Remote Accessories

CR2032 Lithium Coin Battery

Rated 5.00 out of 5
Dealership: $8.00


Our Free Programming Instructions Disclaimer can be found on the NorthCoast Keyless FAQ page.

One thought on “2000 Buick Park Avenue Keyless Entry Remote Fob Programming Instructions

  1. John J Franks IV says:

    you are incorrect, you yourself and anyone else can easily program a fob for the 2000 Buick Park Avenue.

    conntect the #4 and #8 pins on the lower side ie longer side of obd connector with a simple paperclip, it will cycle the lock upon turning on the ignition (not starting it) then you and easily program as many fobs as you wish by simply pushing the lock and unlock buttons on the fob. after 15-30 seconds it will cycle the locks and voila! done. No dealers or locksmiths to rip you off!

    FYI: it took less than 10 minutes

Leave a Reply

Your email address will not be published.