1999 Audi S4 Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

1999 Audi S4

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 1999 Audi S4


AUDI FLIP KEY FOB REMOTES (REMOTE PORTION)
STEP-BY-STEP HOW TO PROGRAMMING INSTRUCTIONS

Minutes 5 minutes

  1. Enter Programming Mode – Step 1

    LOCK Driver’s door from the OUTSIDE using an existing key.

  2. Enter Programming Mode – Step 2

    PRESS and HOLD the LOCK and UNLOCK buttons for 4 seconds on the first remote to be programmed.

  3. Enter Programming Mode – Step 3

    REPEAT Steps 1-2 with EACH remote to be programmed to the vehicle.

  4. Enter Programming Mode – Step 4

    INSERT key into the Ignition and TURN the Ignition switch to the OFF position.

  5. Enter Programming Mode – Step 5

    TEST all remotes.

  6. Enter Programming Mode – Step 6

    TURN Ignition from OFF to the ON position (just shy of cranking engine).

  7. Enter Programming Mode – Step 7

    LOCK Driver’s door from the OUTSIDE using an existing key.

  8. Program Remote(s)

    PRESS UNLOCK button ONCE on the first remote transmitter to assign it to Memory Slot #1. Vehicle will signal successful programming of the remote.

  9. Finalize Programming

    WAIT 6 seconds. PRESS UNLOCK button to finalize programming of the first remote.

  10. Program Additional Remote(s)

    REPEAT Steps 6-9 on any additional remotes to be programmed. Note that you will PRESS the UNLOCK button on each remote that corresponds to the Memory Slot you want to program it to (2 times = Slot #2, 3 times = Slot #3, & 4 times = Slot #4).

  11. Exit Programming Mode

    TURN Ignition to the OFF position and REMOVE key to finalize programming and EXIT Programming mode.

  12. Test Remote(s)

    TEST all remotes. Programming is now complete.

  13. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Supply:

  • Key Fob Remote(s) that you want to program to your vehicle.

Tools:

  • None

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.
  • You will need at least 2 remotes/keys in order to perform this procedure yourself without the help of a Professional.
  • You can program up to 4 remotes to this vehicle’s keyless entry system Memory. 
  • You will be able to assign each remote a Memory Position (1-4). In order to assign a Memory Position, you will PRESS the UNLOCK Button on each remote 1 time for Memory Slot #1, 2 times for Memory Slot #2 and so on.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

1999 Audi S4

OEM Electronic
NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published. Required fields are marked *