1997 Dodge Ram Van Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

1997 Dodge Ram Van

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 1997 Dodge Ram Van


Time needed: 5 minutes.


KEY FOB REMOTE
Step-By-Step How To Programming Instructions

  1. Access Programming Connector

    LOCATE the Programming Connector underneath the Driver’s Side dashboard to the left of the steering column, taped to the wiring harness. It will be a single green wire with a black rubber insulator on the end.

  2. Enter Programming Mode

    JUMP the Programming Connector to a suitable ground (any non-painted metal surface will do) with a suitable ground wire (paperclip).

  3. Insert Key

    INSERT a key into the Ignition and TURN the ignition switch to the ON position (just before cranking).

  4. Program Remote

    PRESS the UNLOCK button on the first remote to be programmed. The locks will cycle LOCK to UNLOCK to indicate successful programming of that remote.

  5. Program Additional Remotes

    REPEAT Step 4 for any additional remotes to be programmed.

  6. Exit Programming Mode

    REMOVE the jumper wire, TURN the Ignition to the OFF position and REMOVE the key from the Ignition to EXIT Programming Mode.

  7. Test Remotes

    TEST all remotes. Programming is complete.

  8. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

1997 Dodge Ram Van

NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published. Required fields are marked *