Easy to Follow Step-by-step Key fob remote Programming Instructions
1997 Cadillac Seville
We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.
Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!
Free Key Fob Remote Programming Instructions for a 1997 Cadillac Seville
Time needed: 5 minutes.
KEY FOB REMOTE - VEHICLES WITH ANALOG CLIMATE CONTROL PANEL (ACCP)
Step-By-Step How To Programming Instructions
:
- Insert Key into Ignition
INSERT key into the Ignition and TURN to the ON/RUN position (just shy of cranking engine).
- Enter Programming Mode
PRESS the OFF and WARM buttons at the same time until the vehicle displays “RFA” and then PRESS the FAN UP button. The Instrument Cluster will light up and off, then display “DIAGNOSTIC MODE” to signal successful entry into Programming Mode.
- Prepare System for Programming – Step 1
PRESS the PASSENGER COOLER button until “RFA” is displayed and then PRESS the FAN UP button. IF instead, “RFA DATA” is displayed, PRESS the FAN DOWN button. IF “RFA OVERRIDE” is displayed, PRESS the FAN UP button.
- Prepare System for Programming – Step 2
IF “RFA 500, NO OVERRIDE” is displayed, PRESS the FAN DOWN button. IF “RFA 501 PROGRAM FOB #1” is displayed, PRESS the FAN UP button. The Driver Information Center (DIC) will display “0” on the right side of the panel. PRESS the WARMER button on the ACCP until a “99” is displayed.
- Program Remote
PRESS and HOLD the TRUNK button on the remote to be programmed. WHILE holding the TRUNK button, PRESS the LOCK button and HOLD for 1 second. PRESS and HOLD the TRUNK and LOCK buttons for a total of 3 seconds. The door locks will cycle LOCK/UNLOCK to signal successful programming of the remote.
- Program Additional Remotes
To program an additional remote, PRESS the FAN DOWN button until “RFA 502 PROGRAM FOB #2” is displayed. PRESS the FAN UP button. REPEAT Step 5.
- Exit Programming Mode
PRESS either the AUTO, MODE UP, MODE DOWN or RESET buttons on the Instrument Panel to EXIT Programming Mode.
- Test Remotes
TEST all remotes. Programming is complete.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Time needed: 5 minutes.
KEY FOB REMOTE - VEHICLES WITH DIGITAL CLIMATE CONTROL PANEL (DCCP)
Step-By-Step How To Programming Instructions
:
- Insert Key into Ignition
INSERT key into the Ignition and TURN to the ON/RUN position (just shy of cranking engine).
- Enter Programming Mode
PRESS the OFF and WARM buttons on the DCCP at the same time. The Instrument Cluster will light up and off, then display “DIAGNOSTIC MODE” to signal successful entry into Programming Mode.
- Prepare System for Programming – Step 1
PRESS the FAN DOWN button until the vehicle displays “RFA” and then PRESS the FAN UP button. PRESS the FAN UP button until “RFA OVERRIDE” is displayed, then PRESS the FAN UP button.
- Prepare System for Programming – Step 2
PRESS the FAN UP button once “NO OVRD RF 500” is displayed. When “PGM FOBL 501” is displayed, PRESS the WARM button and “99” will be displayed on the Driver Information Center (DIC).
- Program Remote
PRESS and HOLD the TRUNK button on the remote to be programmed. WHILE holding the TRUNK button, PRESS the LOCK button and HOLD for 1 second. PRESS and HOLD the TRUNK and LOCK buttons for a total of 3 seconds. The door locks will cycle LOCK/UNLOCK to signal successful programming of the remote.
- Program Additional Remotes
To program an additional remote, PRESS the FAN UP button until “PGM FOB2 502” is displayed. REPEAT Step 5.
- Exit Programming Mode
PRESS either the RECIRC or RESET buttons on the Instrument Panel to EXIT Programming Mode.
- Test Remotes
TEST all remotes. Programming is complete.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Programming Notes:
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.
- You may clear your keyless entry system memory by entering programming mode as shown in the steps above.
If you have any difficulties with programming your vehicles, contact us at [email protected].
Key fob remotes
1997 Cadillac Seville
MONEY BACK GUARANTEE
We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.
FAST & FREE SHIPPING
ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!
CUSTOMER SUPPORT
Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.
SAVE 70% OVER DEALERSHIPS
We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!
- We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
- If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.
When I try to program 97 seville key fob, codes do not match instructions. All your fobs were unavailable so I got one from Amazon. But that should no affect car codes? Any help would be appreciated ,thank you brian