1997 Cadillac Deville Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

1997 Cadillac Deville

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 1997 Cadillac Deville


Time needed: 5 minutes.


KEY FOB REMOTE - WITH ANALOG INSTRUMENT CLUSTER
Step-By-Step How To Programming Instructions

  1. Enter Programming Mode – Step 1

    PRESS the OFF and WARM buttons on the Climate Control Panel (CCP) simultaneously. The Instrument Panel Cluster (IPC) will light all telltales, then go blank to signal that the system is now in Diagnostic Mode.

    PRESS the PASSENGER COOLER button until “RFA” is displayed, then PRESS the FAN UP button.

    If “RFA DATA” is displayed, PRESS the FAN DOWN button. If “RFA OVERRIDE” is displayed, PRESS the FAN UP button.

  2. Enter Programming Mode – Step 2

    If “RFA 500 NO OVERRIDE” is displayed, PRESS the FAN DOWN button. If “RFA 501 PROGRAM FOB #1” is displayed, PRESS the FAN UP button.

  3. Enter Programming Mode – Step 3

    The IPC will show “0” on the right side of the Driver Information Center (DIC) display.

    PRESS the WARMER button on the Climate Control Unit until “99” is displayed.

  4. Program Remote

    PRESS and HOLD the TRUNK button on transmitter.

    WHILE holding the TRUNK button, PRESS the LOCK button and HOLD for 1 second.

    HOLD BOTH buttons for a total of 3 seconds.

    Locks will cycle LOCK / UNLOCK to signal successful programming of the remote.

  5. Program Additional Remotes

    PRESS the FAN DOWN button until “RFA 502 PROGRAM FOB #2” is displayed, then press FAN UP. Repeat Step 4.

  6. Exit Programming Mode

    To EXIT Programming Mode, PRESS AUTO, MODE UP, MODE DOWN, or RESET.

  7. Test Remotes

    TEST all remotes. Programming is complete.

  8. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Time needed: 5 minutes.


KEY FOB REMOTE - WITH DIGITAL INSTRUMENT CLUSTER
Step-By-Step How To Programming Instructions

  1. Enter Programming Mode – Step 1

    PRESS the OFF and WARM buttons on the Climate Control Center (CCC) simultaneously. Instrument Panel Cluster (IPC) will light all telltales, go blank then enter Diagnostic Mode.

    PRESS the FAN DOWN button to scroll through the system until “RFA” is displayed, then PRESS the FAN UP button.

    PRESS the FAN DOWN button until “RFA OVERRIDE” is displayed, then PRESS the FAN UP button.

    When “NO OVRD RF 500” is displayed, PRESS the FAN UP button.

  2. Enter Programming Mode – Step 2

    When “PGM FOBL 501” is displayed, PRESS the WARM button and “99” will be displayed in the left upper corner of the IPC just below the odometer. System is now ready to program the first remote.

  3. Program Remote

    PRESS and HOLD the TRUNK button on the first remote to be programmed.

    While holding the TRUNK button, PRESS the LOCK button and HOLD for 1 second.

    HOLD BOTH buttons for a total of 3 seconds. Locks will cycle LOCK / UNLOCK to signal successful programming of the remote.

  4. Program Additional Remotes

    PRESS the FAN UP button until “PGM FOB2 502” is displayed, then REPEAT Step 3.

  5. Exit Programming Mode

    To EXIT Programming Mode, press RECIRC or RESET buttons.

  6. Test Remotes

    TEST all remotes. Programming is complete.

  7. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.
  • You may clear your keyless entry system memory by entering programming mode as shown in the steps above.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

1997 Cadillac Deville

OEM Electronic
Memory 1
OEM Electronic
Memory 2
OEM Electronic
Non-Memory
NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

2 thoughts on “1997 Cadillac Deville Keyless Entry Remote Fob Programming Instructions

  1. Philippe says:

    Hello, have you or can you have this reference 4 buttons remote control for Cadillac Seville SLS 1997 model export. Thank you for your reply
    Ref. Remote : 16259819. CADILLAC 4 BUTTON REMOTE GM. AB01602T /16259819
    Car: 1G6KS52Y5VU840894

  2. Patsy says:

    Hi I have a 4 button FOB now with horn for the 4th button I just bought a 4 button with the 4th button is trunk FOB from North Coast will I be able to program so both will work?
    Thanks Pat

Leave a Reply

Your email address will not be published. Required fields are marked *