1996 Volvo 960 Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

1996 Volvo 960

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 1996 Volvo 960


Time needed: 5 minutes.


KEY FOB REMOTE
Step-By-Step How To Programming Instructions

  1. Enter Programming Mode – Step 1

    INSERT key and TURN Ignition to the ‘ON’ position (just prior to cranking engine) and back to the ‘OFF’ position 4 times in 10 seconds.

  2. Enter Programming Mode – Step 2

    TURN Ignition to the ‘ON’ position (just prior to cranking engine) to successfully enter Programming Mode.

  3. Program Remote(s)

    WITHIN 30 seconds PRESS either button on EACH remote to be programmed.

  4. Finalize Programming

    TURN Ignition to the ‘OFF’ position and REMOVE key.

  5. Test Remotes

    TEST all remotes. Programming is now complete.

  6. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

1996 Volvo 960

NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published. Required fields are marked *