1996 Volkswagen Passat Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

1996 Volkswagen Passat

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 1996 Volkswagen Passat


Time needed: 5 minutes.


KEY FOB REMOTE
Step-By-Step How To Programming Instructions

  1. Enter Programming Mode – Step 1

    With the Driver’s Door OPEN, CLOSE ALL other doors and the TRUNK.

  2. Enter Programming Mode – Step 2

    INSERT Master Key into the Ignition switch and TURN the Ignition switch to the ON position (just shy of cranking engine).

  3. Enter Programming Mode – Step 3

    EXIT vehicle and CLOSE Driver’s Door.

  4. Enter Programming Mode – Step 4

    INSERT second key into the Driver’s door lock and MANUALLY LOCK the Driver’s door.

  5. Program Remote

    PRESS the UNLOCK Button on the remote to be programmed.

  6. Program Additional Remoes

    AFTER 2 seconds REPEAT Step 5 to program any additional remotes.

  7. Exit Programming Mode

    TURN the Ignition to the OFF Position and REMOVE key  to EXIT Programming Mode. 

  8. Test Remotes

    TEST all remotes. Programming is now complete.

  9. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.
  • You will need at least 2 remotes/keys in order to perform this procedure yourself without the help of a Professional.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

1996 Volkswagen Passat

NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published. Required fields are marked *