1995 Mitsubishi Galant Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

1995 Mitsubishi Galant

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 1995 Mitsubishi Galant


Time needed: 5 minutes.


KEY FOB REMOTE
Step-By-Step How To Programming Instructions

  1. Prepare Vehicle

    CONFIRM that the Central (Power) Locking System is functioning properly.

  2. Enter Programming Mode – Step 1

    LOCATE the keyless remote entry (RKE) receiver module on the Driver’s side behind the rear quarter trim panel in the vicinity of the rear left speaker.

  3. Enter Programming Mode – Step 2

    LOCATE the switch on the RKE receiver module. The switch will have three (3) positions: “SET I”, “FIX” and “SET II”. The switch will be in the “FIX” position for normal operation. 

  4. Enter Programming Mode – Step 3

    MOVE the switch position to “SET I”. The vehicle is now in Programming Mode.

  5. Program First Remote

    PRESS the LOCK or UNLOCK button on the first remote to be programmed.

  6. Program Second Remote – Step 1

    MOVE the switch position to “SET II”.

  7. Program Second Remote – Step 2

    PRESS the LOCK or UNLOCK button on the second remote to be programmed.

  8. Exit Programming Mode

    MOVE the switch position to “FIX”. to EXIT Programming Mode.

  9. Test Remotes

    TEST all remotes. Programming is now complete.

  10. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.
  • You MAY program up to 2 remotes to your vehicle.
  • IMPORTANT: LOCATE the keyless remote entry (RKE) receiver module on the Driver’s side behind the rear quarter trim panel in the vicinity of the rear left speaker. CONFIRM location in your Owner’s Manual.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

1995 Mitsubishi Galant

NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published. Required fields are marked *