1993 Eagle Summit Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

1993 Eagle Summit

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 1993 Eagle Summit


Time needed: 5 minutes.


KEY FOB REMOTE
Step-By-Step How To Programming Instructions

  1. Access Keyless System Receiver Module

    LOCATE the Keyless Entry Remote System Receiver Module on the Driver’s side of the vehicle behind the rear quarter trim panel just above the wheel well.

  2. Enter Programming Mode

    LOCATE the switch on the Receiver Module. There are 3 positions: “SET I”, “FIX” and “SET II.” The switch will be in the “FIX” position for normal operation. MOVE the switch to the “SET I” position in order to successfully enter Programming Mode.

  3. Program Remote

    PRESS the LOCK or UNLOCK buttons on the first remote to be programmed.

  4. Program Additional Remote – Step 1

    MOVE the switch to either the “FIX” position to finish programming or the “SET II” position to program a second remote.

  5. Program Additional Remote – Step 2

    REPEAT Step 3 to program another remote to your vehicle.

  6. Exit Programming Mode

    MOVE the switch to the “FIX” position to finish programming and EXIT Programming Mode.

  7. Test Remotes

    TEST all remotes. Programming is complete.

  8. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.
  • This procedure will only work if the vehicle’s electronic locking system is functioning properly.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

1993 Eagle Summit

NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published. Required fields are marked *