1992 Honda Civic Keyless Entry Remote Fob Programming Instructions

Easy to Follow Step-by-step Key fob remote Programming Instructions

1992 Honda Civic

We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Key Fob Remote Programming Instructions for a 1992 Honda Civic


HONDA KEY FOB REMOTES STEP-BY-STEP HOW TO PROGRAMMING INSTRUCTIONS

Minutes 5 minutes

  1. Enter Programming Mode – Step 1

    LOCATE the keyless entry system control module in your vehicle (likely located beneath the Driver’s seat).

  2. Enter Programming Mode – Step 2

    LOCATE the keyless entry memory chip compartment on the control module.

  3. Enter Programming Mode – Step 3

    REMOVE the circuit board compartment cover and REMOVE the keyless entry memory chip.

  4. Enter Programming Mode – Step 4

    REPLACE the chip with the replacement chip that you were sent with your replacement remote to ENTER Programming Mode.

  5. Program Remote(s) – Step 1

    LOCATE the small “Reset Button” next to the keyless entry memory chip cover on the control module.

  6. Program Remote(s) – Step 2

    PRESS the “Reset Button” for a few seconds in order to ACTIVATE your new remote.

  7. Test Remotes

    TEST all remotes. Programming is now complete.

  8. Share

    If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Supply:

  • Key Fob Remote(s) that you want to program to your vehicle.

Tools:

  • None

Programming Notes:

  • Verify the following prior to following these instructions:
    • Your vehicle is equipped with keyless entry, and
    • You have a key fob remote that is compatible with your vehicle.
  • Obtain ALL remote transmitters for this vehicle.
  • You will need the original remote’s memory chip on hand in order to successfully program a new remote. This will be found in the keyless entry system control module, not the remote itself.

If you have any difficulties with programming your vehicles, contact us at [email protected].

Key fob remotes

1992 Honda Civic

NorthCoast Keyless Free Programming Instructions Disclaimer:
  • We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
  • If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.

Leave a Reply

Your email address will not be published. Required fields are marked *