Easy to Follow Step-by-step Key fob remote Programming Instructions
2006 Hummer H2
We strive to provide convenience to our customers with free keyless entry remote fob programming instructions for every single vehicle that we sell on NorthCoast Keyless.
Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!
Free Key Fob Remote Programming Instructions for a 2006 Hummer H2
Time needed: 5 minutes.
KEY FOB REMOTE
Step-By-Step How To Programming Instructions
- Close All Doors
CLOSE all doors.
- Enter Programming Mode – Step 1
INSERT key into the Ignition (DO NOT TURN).
- Enter Programming Mode – Step 2
PRESS and HOLD the power UNLOCK button on the Driver’s side door. DO NOT release until instructed.
- Enter Programming Mode – Step 3
TURN the Ignition ON, OFF, ON, OFF
(ON is the position just shy of cranking the engine and OFF is where you can remove your key). - Enter Programming Mode – Step 4
RELEASE the power UNLOCK button on the Driver’s side door.
Upon release of the UNLOCK button, the vehicle should respond by cycling the door locks LOCK / UNLOCK signaling successful entry into Programming Mode.
a. IF the door locks cycle, continue to Step 6. If the door locks cycle BEFORE releasing the UNLOCK button, the vehicle has NOT entered Programming Mode and you must RETURN to Step 1.
b. IF the door locks continue to cycle BEFORE releasing the UNLOCK button, there is a problem with the vehicle’s keyless entry system and the remotes must be programmed by a certified professional Automotive Locksmith or Dealer.
c. IF you are unable to get the door locks to cycle at all, you are turning the key too quick or too slow, there is a problem with your vehicle’s keyless entry system, or the vehicle is not equipped with keyless entry. Check with a certified professional Automotive Locksmith or Dealer. - Program Remote
HOLD the LOCK and UNLOCK buttons on the remote at the same time, up to 30 seconds, until door locks cycle LOCK / UNLOCK to signal successful programming of the remote.
- Program Additional Remotes
REPEAT Step 6 for any additional remotes to be programmed, including working ones.
- Exit Programming Mode
TURN ignition to ON to EXIT Programming Mode.
- Finalize Programming
TURN Ignition to OFF and remove key to finalize programming.
- Test Remotes
TEST all remotes. Programming is complete.
- Share
If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Programming Notes:
- Verify the following prior to following these instructions:
- Your vehicle is equipped with keyless entry, and
- You have a key fob remote that is compatible with your vehicle.
- Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.
- You may clear your keyless entry system memory by entering programming mode as shown in the steps above.
If you have any difficulties with programming your vehicles, contact us at [email protected].
Key fob remotes
2006 Hummer H2
MONEY BACK GUARANTEE
We offer a No Questions Asked Money Back Guarantee on all of our products!If you can’t get it to work for your vehicle–reach out!We’ll get you your money back.
FAST & FREE SHIPPING
ALWAYS! First Class USPS shipping is always shipped for free for all Domestic (US) customers in less than ONE business day. No ifs, ands, or buts!
CUSTOMER SUPPORT
Have a question for us? Reach out! We're here for you. We will work with you to solve your issue rather than just having you return an item without a solution like some of the big box online stores do.
SAVE 70% OVER DEALERSHIPS
We’ve worked hard to create a network of reliable and reasonably priced suppliers that allow us to give you rock bottom prices.You're also not paying for huge fancy offices or sports cars for our Owners. We always will be just regular people tryin’ to make a livin’ not a killin’!
- We worked hard to provide these instructions to our customers. We checked multiple sources to ensure that this information is complete and accurate. However, please understand that we cannot be held liable for any loss due to incorrect use of the programming instructions from www.northcoastkeyless.com.
- If you cannot program your remote with the instructions that we provide or encounter any discrepancies, please contact us at [email protected] and we’ll make sure that you’re taken care of.
First, thanks for providing instructions! This makes the task of replacing key fobs much easier. By the way, do you know how the device got the name, “Fob”?
There seems to be a typo in the directions. Step 3 states that one must not release the lock/unlock button, on the driver’s door, until step 5. Should it be step 4?
I have ordered from you in the past and being a US Army, Special Forces Veteran, I do not purchase “cheap”, useless stuff. I am very active and my fob still looks and works great, several years later.
Thanks, again!
John R Curtis
Hey John!
Thanks for reaching out. Here’s a short article explaining the background of the word “fob” in this usage: http://www.theatlantic.com/technology/archive/2010/10/tech-etymology-key-fob/64638/
Also, thank you for the feedback. We are always working to improve our instructions. We will take a look and adjust our instructions accordingly.
We are happy to offer people a way to still buy high-quality OEM and save money at the same time. There are a lot of counterfeit remotes being sold as “replacement” out there.
Take care and thank you for your business!
NorthCoast Support
Thanks for your kind words, and your response to my comments.
I had to program another remote today and I noticed that the instructions are unchanged. Am I reading them in correctly or is there an error and the steps and/or language? Still, it was very simple and fast when I programmed another remote, so that my son would have one as well.
If you are considering purchasing a replacement remote, look no further than this company. Do not purchase the one you see on eBay power and I say or from a reputable Company like North Coast Keyless. I have friends who have purchased some off of eBay and other sites that sell illegal phone and I can sure you that the ones that they are selling our j I have friends who have purchased some off of eBay and other sites that sell illegal phone and I can sure you that the ones that they are selling are merely JUNK, that you would be wasting your money and time on. I know that when my wife or my kids are traveling, that they are able to get into their vehicle, without fumbling with the keys to unlock the door, because, the remote doesn’t work. Women or at the most vulnerable when they are Unlocking their vehicle with a key and losing focus of the things around them and possible threats. I retired as a state law for Nelson, after 20+ years and I can assure you that The majority of attacks on women , That occur in parking areas, happen while they are attempting to unlock the door with a key. Not trying to scare anyone and I gain nothing by making these comments, other than to possibly save someone from serious bodily injury or worse. I have even seen where the cloned remotes unlocked the vehicle’s doors, while traveling down the road and small children opening the door.
I cannot stress this enough – don’t take shortcuts when it comes to your loved ones safety .
Thank you so much for this! This made the process so easy and SO FAST when I had to replace my missing key fobs.