1996 Cadillac Seville Keyless Entry Remote Programming Instructions

Cadillac Keyless Entry Remote Programming Instructions

Easy to Follow Step-by-step Instructions for Programming a 1996 Cadillac Seville Keyless Entry Remote

We strive to provide convenience to our customers with free keyless entry remote programming instructions for every single vehicle that we sell on NorthCoast Keyless.

Many people don’t know that they can purchase their own replacement vehicle entry remote, save up to 70% off of marked up Dealership prices, and program the replacement remote to their vehicle themselves. We know how good it feels to save money and do something yourself; and we aim to make it as painless as possible for you!

Free Step-by-Step Programming Instructions for a 1996 Cadillac Seville Keyless Entry Remote

Verify that this important information is on the the back of your remote before using these programming instructions.

FCC ID: ABO0702T

Factory Part No: 10178734, 10269729

Doc Cert No: DOC 218 K903

Programming Notes:

Obtain all remote transmitters for this vehicle. This procedure will erase all previously programmed remotes. You must program all existing and new remotes that you wish to use on the vehicle at this time.

Step-by-Step Programming Instructions:

Use these instuctions if your Seville has an Analog Instrument Cluster 

  1. Press OFF and WARM buttons on  Climate Control Panel (CCP) simultaneously.  (Instrument Panel Cluster (IPC) will light all telltales, then go blank) System is now in diagnostic mode. Press PASSENGER COOLER button until “RFA” is displayed, then press FAN UP.  If   “RFA DATA” is displayed, press FAN DOWN. If   “RFA OVERRIDE” is displayed, press FAN UP.
  2. If  “RFA 500 NO OVERRIDE” is displayed, press FAN DOWN. If  “RFA 501 PROGRAM FOB #1” is displayed, Press FAN UP.
  3. IPC will show “0” on right side of Driver Information Center (DIC) display. Press warmer button on climate control unit until “99” is displayed.
  4. Press and hold TRUNK button on transmitter. While holding TRUNK button, press LOCK button and hold for one second. Hold both buttons for a total of 3 seconds. Locks cycle when programming is complete (if remote is not programmed within 30 seconds after entering “99” override display, system will default and you must begin again at Step 2.
  5. To program a second remote, press FAN DOWN button until  “RFA 502 PROGRAM FOB #2” is displayed, then press FAN UP.  Repeat Step 4.
  6. To exit system, press AUTO, MODE UP, MODE DOWN, or RESET.
  7. Test all remotes. Programming is complete.
  8. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

Use these instuctions if your Seville has a Digital Instrument Cluster

  1. Press OFF and WARM buttons on Climate Control Center (CCC) simultaneously. Instrument Panel Cluster (IPC) will light all telltales, go blank then  enter DIAGNOSTICMODE. Press FAN DOW button to scroll through system until “RFA” is displayed, then press FAN UP button. Press FAN DOWN button until “RFA OVERRIDE” is displayed, then press FAN UP button. When  “NO OVRD RF 500” is displayed, then press FAN UP button.
  2. When “PGM FOBL 501” is displayed, press WARM button and “99” will be displayed in left upper corner of IPC just below odometer. System is now ready to program remote.
  3. Press and hold TRUNK button on transmitter. While holding TRUNK button, press LOCK button and hold for one second. Hold both buttons for a total of 3 seconds. Locks cycle when programming is complete (if remote is not programmed within 30 seconds after entering “99” override display, system will default and you must begin again at Step 2.)
  4. To program second remote, pres FAN UP button until “PGM FOB2 502” is displayed, then follow steps 2 and 3 toprogram second remote.
  5. To exit system, press RECIRC or RESET buttons.
  6. Test all remotes. Programming is complete.
  7. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.

 

 

If you have any difficulties with programming the remote you ordered from us to your vehicle, contact us at support@northcoastkeyless.com.

 

View our entire catalog of FREE Cadillac keyless entry remote programming instructions!

Need a 1996 Cadillac Seville keyless entry remote? We’ve got you covered!

Need a new battery for your 1996 Cadillac Seville keyless entry remote? We’ve got that too!

Remote Accessories

CR2025 Lithium Coin Battery

Dealership: $8.00
$3.94
Save On Your Purchase by Sharing with Friends!
You about to save some mega moolah with NorthCoast Keyless! Save even more by sharing your purchase with friends and you will receive a special discount at checkout!


 

Our Free Programming Instructions Disclaimer can be found on the NorthCoast Keyless FAQ page.

Leave a Reply

Your email address will not be published.